======================================================
License Agreement for Fuji Xerox PCL 6 Printer Driver
======================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.
   
2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in your country.  You are
   not permitted to (1) assign, sublicense, sell, rent, lease, convey,
   or transfer the SOFTWARE to any third party by any tangible media
   such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the
   SOFTWARE on a network or by a telephone line available to the
   public or (3) alter, modify, decompile, disassemble, reverse
   engineer, or create derivative works based on the whole or any
   part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction. 
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS'
   BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
   FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
   YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER
   HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE.
   IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS,
   AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR
   ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR
   DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY
   MODIFICATION OF THE SOFTWARE.  
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any restrictions,
   laws or regulations imposed by the government of your country or
   any other relevant countries, and are required to obtain necessary
   approval prior to exporting the SOFTWARE.


=============================================================================
Additional Information:
FUJI XEROX DocuPrint C1110/C1110 B
Printer Driver Version 2.6.15.0 for
                    Microsoft(R) Windows(R) 2000,
                    Microsoft(R) Windows(R) XP, 
                    Microsoft(R) Windows Server(R) 2003,
                    Microsoft(R) Windows Vista(R),
                    Microsoft(R) Windows Server(R) 2008 and
                    Microsoft(R) Windows(R) 7.
=============================================================================
This document provides information about the printer driver on the
following items: 

  1. Requirements
  2. Installation
  3. Limitations
  4. Software Upgrade from the Earlier Version
  5. Software Update

 1. Requirements
=================
   * Please note that this printer driver operates on a PC/AT
     compatible processor with Intel(R) Pentium(R) II & above, 
     running on Microsoft(R) Windows(R) 2000, Windows(R) XP, 
     Windows Server(R) 2003, Windows Vista(R), Windows Server(R) 2008,
     Windows(R) 7.

 2. Installation
=================
Follow the instructions below to install PCL 6 printer drivers.

Important
----------
* Close all the running applications before installing the printer 
  driver.  
* Always reboot the computer after installing an upgraded version of 
  the printer driver.  
* If you have deleted an older version of the printer driver, always 
  reboot the computer before installing the new version.  
* The installation procedures are written with the assumption that
  standard settings have been configured in Windows.
  The procedures may differ if the start menu or folder options have
  been changed.  
* You may not be able to install correctly if installation is made 
  using Power User rights. Re-install as an Administrator.
* Installation may not be successful if this driver is not installed
  using the following procedure.
* Please refer to the following section of this chapter for driver 
  deletion method under Windows Vista, Windows Server 2008, 
  and Windows 7.
   * About driver deletion method (When using Windows Vista,
     Windows Server 2008, or Windows 7)
* Please refer to the following section of this chapter for installation 
   method using plug-and-play under Windows 7.
   * About driver installation method using plug-and-play 
     (When using Windows 7)

1) Double-click the downloaded compressed file (.Zip format) to 
   decompress.  
2) Activate the "Add Printer Wizard".  
   2a) For Windows 2000, click the "Start" button.  Point to
       "Settings" and click "Printers".  
       Double-click the "Add Printer" icon.  
   2b) For Windows XP, click the "Start" button.  Point to
       "Settings" and click "Printers and Faxes".  
       Click the "Add a printer" icon.  
   2c) For Windows Server 2003, click the "Start" button.  Point to 
       "Settings" and click "Printers and Faxes".  
       Double-click the "Add Printer" icon.  
   2d) The following steps are available for use when installing 
       printer under Windows Vista and Windows Server 2008.
       * Click "Start" button and then click "Control Panel".
       * Select "Printer" in "Hardware and Sound" then select 
       "Add a Printer".
     <Caution> If you are using Windows Server 2008, right-click in
     "Printers" folder and select "Add Printer" in 
     "Run as administrator".
   2e) The following steps are available for use when installing 
        printer under Windows 7.
       * Click "Start" button and then click "Devices and Printers".
       * Select "Add a printer" in "Devices and Printers".
3) Specify the printer connection.
   * For a local printer:
     3-1a) For Windows 2000, select "Local printer".  
     3-1b) For Windows XP and Windows Server 2003, select
           "Local printer attached to this computer".
     3-1c) When using Windows Vista, Windows Server 2008, or
           Windows 7, please click "Add a local printer."
     Proceed to step 4).  
   * For a network printer:
     3-2a) For Windows 2000, select "Network printer" and click the
           "Browse" button.  
     3-2b) For Windows XP and Windows Server 2003, select 
           "A network printer, or a printer attached to another 
           computer".
     3-2c) When using Windows Vista, Windows Server 2008, or Windows 7,
           please click "Add a network, wireless or Bluetooth printer".
     Specify the desired printer from the network.
     Contact the network administrator if you have any queries.
     Proceed to step 11).  
4) Specify the port to be used for the printer.  
   Create a port if there is no output port.
5) Click "Have Disk" from the "Add Printer Wizard" screen.  
   The "Install From Disk" screen is displayed.  
   Specify the directory containing the uncompressed files in step 1)
   in the "Copy manufacturer's files from" box.  Click "OK".  
6) A list of printers is displayed.  Select the desired printer.  
   If the selected printer is already installed, a message asking 
   whether to replace the existing driver is displayed.  
   When installing a new version of the printer driver, select 
   "Replace existing driver" or "Replace the current driver".
   The older version of the driver cannot be deleted if it is used 
   in an application.  In this case, close the application. 
7) A dialog box for specifying the printer name is displayed.  
   To change the printer name, enter any name in the "Printer name" 
   box. 
   For Windows 2000, Windows XP, Windows Server 2003, Windows Vista, 
   and Windows Server 2008, if other printers are installed, a message 
   asking whether to set this as the default printer is shown.  
   7a) When using Windows 2000, Windows XP, or Windows Server 2003,
       please click "Yes" button if you want to set a printer as 
       default.
   7b) When using Windows Vista, or Windows Server 2008, please check 
        the "Set as the default printer" checkbox if you want to set 
        a printer as default.  
       As the following steps are slightly different for Windows Vista, 
       Windows Server 2008, and Windows 7, please proceed to step 13). 
8) Specify whether to share this printer with other network users.  
9) A dialog box specifying whether to print the test page after 
   installation is shown.
    To perform test printing on the print driver, load letter paper
    to the printer, select "Yes" and then "Next". 
    Select "No" and click "Next" if you do not wish to print the test
    page.
10) A dialog box to confirm the settings is displayed.  Click 
    "Finish" after confirming the settings.  
11) A dialog box to confirm the continuation of installation is 
    displayed.  
    11a) For Windows 2000, a message about the Electronic Signature
         cannot be found may be displayed but this does not cause
         functional problem.  
         Click "Yes". 
    11b) For Windows XP and Windows Server 2003, a message saying
         that it did not pass the Windows Logo Test may be displayed
         but this does not cause functional problem.
         Click "Continue Anyway". 
12) The necessary files are copied and a new printer icon is 
    created.  
    If you have printed the test page, a printer test result 
    confirmation message is displayed.  
    This completes the installation.  
13) For Windows Vista, Windows Server 2008, and Windows 7, 
    this is the start of the driver installation. 
    During the process, if you are asked whether or not to continue 
    installation on the "User Account Control" dialog, click "Continue" to 
    proceed the process.  
    If you are installing the driver as a user without administrator rights, 
    select a user with administrator rights, enter the password, and click 
    "OK".  
14) If the pop-up dialogue stating "Windows can't verify the publisher 
     of this software" appears, ignore it.  Click "Install this driver 
     software anyway." to continue with the installation.
       * For Windows 7, a message "Windows can't verify the publisher
         of this driver software" appears.  
15) Make sharing settings.  
    If the driver is installed with administrator rights, a dialog to make 
    sharing settings appears.  Make sharing settings in this dialog and 
    click "Next".  
16) The driver installation is completed.
    Click "Print a test page" button if you want to print a test page. 
    Please refer to step 9) for the details of test page printing.
    For Windows 7, when other printers are already installed, 
    the "Set as the default printer" checkbox is displayed.  
    If you want to set the printer as default, check the checkbox, and 
    click "Finish".  

    Next, we set the installed printer options.

17) Right-click the printer icon, and select "Properties" from the 
    right-click menu.  
18) Click the "Options" tab.
    Make settings when the "Options" tab is displayed.

About driver deletion method 
(When using Windows Vista, Windows Server 2008, or Windows 7)
-------------------------------------------------------------
To remove drivers from system under Windows Vista, Windows Server 2008, 
or Windows 7 completely, please delete drivers and driver package 
according to the following steps.

  <<Windows Vista, Windows Server 2008>>
   * Click "Start" and open "Control Panel", then select "Printer" in
     "Hardware and Sound" panel.
   * Delete printer icon in "Printers" folder.
   * Right-click in "Printers" folder and select "Run as 
     Administrator".
     Click "Server Properties" then "Printer Server Properties" 
     window is displayed.
   * Select the driver to be deleted from the "Drivers" tab and click 
     "Remove" button.
   * Select "Remove driver and driver package.", then click "OK" 
     button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and 
     try to delete again.   
   * Restart the computer.

  <<Windows 7>>
  * Click "Start" and select "Devices and Printers".  
  * Click the printer icon in the "Devices and Printers" folder, 
    and select "Remove device" menu to delete it.   
  * Click any of the icons displayed in "Printers and Faxes" in the
    "Devices and Printers" folder and select "Print server properties".  
  * Click the "Drivers" tab to open it.  
  * When the "Change Driver Settings" button is displayed, click it.  
  * Select a driver to delete from the "Drivers" tab and click the "Remove" 
    button.  
  * Select "Remove driver and driver package" and click the "OK" button.  
  * When the driver is in use, a message appears and the driver package
    may not be able to be deleted.  In such case, reboot the computer and 
    try to delete again.   
  * Restart the computer.

About driver installation method using plug-and-play
(When using Windows 7)
-------------------------------------------------------------
When a driver is installed using plug-and-play under Windows 7, it may not
be installed properly.  In such case, follow the steps below to reinstall 
the driver. 

  * Click "Start" and select "Devices and Printers". 
  * In the "Devices and Printers" folder, right-click the icon of this 
    printer and select "Properties".  
    *When the icon is disabled and inoperable, turn off/on the printer
     and make sure the printer is connected securely with a cable.  
  * Select this printer in "Device Functions" in the "Hardware" tab, and
    click the "Properties" button to open the Properties dialog. 
  * Click the "Change settings" button and open a new "Properties" dialog.  
  * In the new "Properties" dialog, open the "Drivers" tab, and click the 
    "Update driver" button to open the "Update driver software" dialog.  
  * Select "Browse my computer for driver software" and specify 
    the driver's location under "Search for driver software in this location:".
    Click "Next".
    *Please refer to the steps for driver installation using "Add Printer 
     Wizard" for how to prepare the driver.   
  * When a message stating that the driver has been updated successfully,  
     click "Close" to close the dialog.  
     Now, the driver has been reinstalled successfully.  

 3. Limitations
================

(1) When a printed pattern or diagram is different from what you see
    on the screen, changing the following settings may alleviate the
    problem.

    * Change the "Print Mode" setting on the "Graphics" tab.
    * Change the "Image Types" and the "Image Auto Correction" settings 
      on the "Graphics" tab.
    * Set "High Speed Image Processing" on the "Detailed Settings"
      tab to "Off".
    * Set "Draw the pattern with fine lines as per the resolution"
      on the "Detailed Settings" tab to "On".
    * Change the "Resolution" setting in the "Other Settings
      (Graphics Settings)" on the "Detailed Settings" tab.
    * Change the "Halftone Print" setting in the "Other Settings
      (Graphics Settings)" on the "Detailed Settings" tab.

(2) The print layout may be changed when you change the "Print Mode"
    in the "Graphics" tab.

(3) Depending on the application, if the "Print Mode" is
    "High Resolution" or "High Quality" or the resolution of the driver 
    is more than 600dpi, the size of the print data may become huge and 
    printing cannot be done properly. When this happens, specify the 
    following settings:

    * Specify the "Print Mode" to "Standard" in the "Graphics" tab
      or "Resolution" in the "Other Settings (Graphics Settings)" in
      the "Detailed Settings" tab to "300dpi" or "200dpi".

(4) When doing a print job by specifying Paper Source as Auto, be
    sure to set Paper Size in the application to the Paper Size that
    the driver supports to enable the automatic paper feed feature.

(5) When using the Form Overlay feature, use form data of the same
    Paper Size, Resolution, and Image Settings as those of the
    document you want to print.  If these settings are different
    between form data and the page where the form data is incorporated,
    expected print results may not be obtained.

(6) With Booklet Creation, the "Page Number" item selected in the
    Header/Footer Options may not be printed properly. 

(7) When printing from the application of Visio2003, if the
    "Print Mode" setting is changed from "Standard" to
    "High Resolution" before printing, data may be scaled down and
    printed in the upper left corner.  This issue can be avoided by
    setting "Print Mode" to "High Resolution" in the printer folder
    before starting the application.

(8) With Adobe PageMaker, when this printer is specified for "Compose
    to printer", a layout may change in printing.  This issue can be
    avoided by performing the following steps;

    <1> Do not set "Compose to printer".
    <2> Change the "Margin" setting in advance in the printer folder.
    <3> Specify "Extended" on the Print Area tab in advance in the
        printer folder.

(9) The print result may overlap if Multiple Up and Print Area
    [Normal] are selected when printing a document that has exceeded
    the print area of the printer driver. When this happens, select
    the "Extended" in the "Print Area" dialog box in the
    "Margin Shift/Margin" in the "Tray/Layout" tab."

 4. Software Upgrade from the Earlier Version
=============================================

2.6.15.0
--------
* Windows 7 is supported.
* Fix the issue of TrueType Glyph problem

2.6.6.0
--------
Initial version

 5. Software Update
===================
    The latest software is available on our web site.

         http://www.fxprinters.com/

    Communication charges will be borne by the customer.


Portions of this software are based in part on the work of the
Independent JPEG Group.

Microsoft is the registered trademark of Microsoft Incorporated.
Windows is the registered trademark of Microsoft Incorporated.
Other names of products and companies are the trademarks or
registered trademarks of each company.
Copyright 2009 Fuji Xerox Co., Ltd. All rights reserved.
----------------------------< End of File >--------------------------
