-----------------------------关于汉化-----------------------------
汉化作者：小楼一夜听春语
汉化版本：V3.1
支持版本：Axure RP 9
汉化时间：2019年03月07日
来源网站：www.iaxure.com/www.chanpinban.com
汉化声明：未经作者许可，严禁任何机构或个人盗用！
-------------------------------MAC-------------------------------
"Exit" :: "退出"
"This beta version is for licensed customers.\nPlease enter a license key or log in to a subscribing account." :: "此测试版限授权客户使用。\n请输入授权密钥或登录到订阅帐户。"
"Congratulations!" :: "祝贺你！"
"You are now using a licensed copy of Axure RP." :: "您现在使用的是已经授权的Axure RP。"
"Opening {0} ..." :: "正在打开 {0} ..."
"Thank you" :: "感谢！"
"The license has been removed from this copy of Axure RP." :: "授权已经从AxureRP中删除。"

-------------------------------标题-------------------------------
"Untitled" :: _
" : Licensed to {0}" :: " : {0} 已授权     [Axure中文网 V3.1]"
" : Unlicensed" :: " : 未授权     [Axure中文网 V3.1]"

-------------------------------提示-------------------------------
"Beta version {0} expires in {1} days" :: "测试版本{0}将于{1}天后过期！"
"Click here" :: "点击这里"
" to check for updates or update at" :: "检查更新或访问后方网址进行更新："
"Axure RP Needs to Close" :: "Axure RP需要关闭"
"An error has caused Axure RP to shut down.Please email support@axure.com to troubleshoot. Let us know what you were doing when the error occurred, and send us the error log from this location:\r\n\r\n{0}\r\n\r\nTo continue working, re-launch Axure RP." :: "错误导致Axure RP关闭。请发送电子邮件至support@axure.com进行故障排除，并将错误日志发送给我们，让我们知道错误发生时您在做什么，错误日志的保存位置：\r\n\r\n{0}\r\n\r\n如果需要继续工作，请重新启动Axure RP。"
"Would you like to save the current document?" :: "您是否需要保存当前文档内容？"
"It looks like Axure may not have shut down properly.\r\n\r\nWould you like to try to recover a file from a backup?" :: "Axure上一次可能未正常关闭。\r\n\r\n是否需要从备份中恢复文件？"
"This file is already open in another instance of Axure RP." :: "此文件已经在另一个Axure RP中打开。"
"This file is currently in use. Please save using a different file name or wait until the file becomes available." :: "此文件正在使用。请使用其它名称保存，或等待文件可用。"
"This file is currently in use. Please wait until the file becomes available or create a copy for your own use." :: "此文件正在使用。请等待文件可用，或创建副本使用。"
"This file is currently in use. Please wait until the file becomes available or create a\ncopy for your own use." :: "此文件正在使用。请等待文件可用，或创建副本使用。"
"The file {0} could not be found.\nPlease verify that the file exists and try again." :: "文件{0}未找到，请检查此文件是否存在并重试！"
"Error Loading Image" :: "图片加载错误"
"There was an error loading {0}." :: "图片[{0}]加载错误！"
"Double-click a page in the Pages pane to open it." :: "在页面功能区中双击一个页面打开它。"
"Deleting these pages and folders will delete all of their sub pages.\nAre you sure you want to delete all of these pages?" :: "删除这些页面和文件夹将会删除它们的子页面。是否删除？"
"The name entered was invalid. Names cannot be empty.\nPlease try again." :: "名称不能为空。请重试！"
"Deleting these masters and folders will delete all of their sub masters.\nAre you sure you want to delete all of these masters?" :: "删除这些母版和文件夹将会删除它们的子母版。是否删除？"	
"The following masters cannot be deleted because they are being used." :: "以下母版正在使用不能删除。"
"The column name is invalid or in use:\r\n\r\nColumn names must all be alphanumeric (no accents), and start with a letter. Please try again." :: "列名无效或者已被使用：\r\n\r\n列名应为半角英文字母或数字的组合，并且以字母开头。请重试！"
"The variable name is invalid or in use:\n\nVariable names must be 25 characters or less, all alphanumeric, and start with a letter. Please try again." :: "变量名称无效或已使用：\n变量名称必须少于25个字符，全部为字母数字，并以字母开头。\n请再试一次。"
"Axure RP cannot spell check for the current language settings." :: "Axure RP无法对当前语言设置进行拼写检查。"
"YOUR PROJECT HAS BEEN LOADED" :: "您的项目已载入完成"
"Please save your project to a new file. Files saved in Axure RP 9 will not open in previous versions." :: "请将您的项目保存为一个新的文件。Axure RP 9保存的文件不能够被以前的版本打开。"
"LOADING PROJECT FOR 9" :: "加载项目到Axure RP 9"
"This may take a few minutes for large files. Your current file will not be overwritten." :: "加载较大文件需要等待一段时间；您当前的文件不会被覆盖。"
"Converting {0} ..." :: "正在转换{0}..."
"Axure RP cannot open the file:\n\"{0}\"\n\nValid Axure RP files are: {1}, {2}, {3}, {4} and {5}." :: "Axure RP 不能打开：{0}\n有效的Axure RP文件包括: {1} | {2} | {3} | {4} | {5}。"
"The libraries were not loaded." :: "元件库未能载入。"
"This image is very large and may cause the application to run slower.\nWould you like to optimize it?" :: "图像太大会导致程序运行缓慢，是否进行优化？"
"Table or Image" :: "表格或图片"
"Would you like to paste as Table data?\nClick Yes to paste as Table data. Click No to paste as image." :: "粘贴为表格请选择“是”，粘贴为图片请选择“否”。"
"You cannot open the same file as the one being edited." :: "无法打开与当前编辑文件相同的文件。"
"Report Error" :: "错误报告"
"An error has occurred. Click “Submit” to send an error report to Axure. Providing an email address will give us an opportunity to request additional information. Please email support@axure.com if you need assistance." :: "发生了一个错误。点击“提交”按钮发送错误报告给Axure团队。留下您的电子邮箱地址，让我们有机会获取额外的信息。如果您需要帮助，请用发送电子邮件至“support@axure.com”。"
"If you are unable to save your file due to this error, use File->Recover File to recover the latest AutoSaved version." :: "如果这个错误导致文件无法保存，可以使用[文件->从备份中恢复...]恢复您计算机上最近自动保存的副本。"
"Please provide additional information about how the error occurred." :: "请提供有关这个错误的更多信息。"
"Beta Version {0} has expired\nUpdate with Help > Check for Updates or at www.axure.com/beta" :: "测试版本{0}已过期！\n请通过“帮助”-“检查更新”或访问“www.axure.com/beta”进行软件升级"
"Trouble Getting Online Libraries" :: "获取在线元件库失败"
"Unable to connect. Please make sure you have an internet connection and try again." :: "无法连接。请确保您的设备已连接网络，然后重试。"
"Snapshot of Itself" :: "快照循环引用"
"A Snapshot cannot reference the Page or Master that contains it.\n\n" :: "快照无法引用包含该快照的页面或母版。\n\n"
"Place" :: "放置"
"Place or Paste" :: "放置或粘贴"
"The copied widgets are unplaced in this view. Select Place to make the widgets visible in this view or Paste to add new widgets." :: "复制的元件未放置在此视图中。选择放置让元件在此视图中可见或选择粘贴以添加新的元件。"

-----------------------------欢迎界面-----------------------------
"Welcome to {0}" :: "欢迎使用 {0}"
"Enter License" :: "输入授权"
"Log In" :: "登录"
"OPEN FILE" :: "打开文件"
"NEW FILE" :: "新建文件"
"Don't show this at startup." :: "不再显示"
"Close" :: "关闭"

-----------------------------管理授权-----------------------------
"Manage License" :: "管理授权"
"MANAGE YOUR LICENSE" :: "管理您的授权"
"LICENSE KEY" :: "授权"
"Licensee" :: "被授权人"
"Key" :: "授权密钥"
"SUBSCRIPTION" :: "订购"
"Email" :: "邮箱"
"Password" :: "密码"
"Clear" :: "清空"
"Need help?" :: "需要帮助？"
"Proxy Settings" :: "代理设置"
"Forgot password?" :: "忘记密码？"
"Submit" :: "提交"
"Cancel" :: "取消"
----------提示----------
"This is a valid license." :: "这是一个有效的授权。"
"The licensee does not match the key. Please verify the licensee." :: "被授权人与授权密码不匹配，请确认被授权人是否填写正确。"
"Invalid licensee/key pair." :: "无效的被授权人与授权密码。"

---------------------------登录注册退出---------------------------
"LOG IN TO YOUR ACCOUNT" :: "登录您的账户"
"Log in to publish and host files with Axure Share. Share prototypes with your team and with clients. Co-author protoypes and specifications (Team and Enteprise Editions only)." :: "登录之后，可以发布和托管文件到Axure Share，与你的团队和客户共享原型。同时，可以多人协作原型与规范（仅限团队版与企业版）。"
"Log in to publish and host files. Share prototypes with your team and clients." :: "登录后可以发布和托管文件，与你的团队和客户共享原型。"
"LOG IN" :: "登录"
"CREATE ACCOUNT" :: "注册"
"I agree to the " :: "我同意 " 
"Axure terms" :: "Axure条款" 
"OK" :: "确定"
"Edit Profile on Axure Portal" :: "在Axure官网编辑文件"
"Manage License on Axure Portal" :: "在Axure官网管理授权"
"Log out" :: "退出"
----------提示----------
"The email and password combination is not valid." :: "无效的邮箱与密码。"

-------------------------------导航-------------------------------
"&File" :: "文件(&F)"
"&Edit" :: "编辑(&E)"
"&View" :: "视图(&V)"
"&Project" :: "项目(&P)"
"&Arrange" :: "布局(&A)"
"&Publish" :: "发布(&P)"
"&Account" :: "账户(&C)"
"&Help" :: "帮助(&H)"
"&Help  [Axure中文网 V3.1]....." :: "帮助(&H)"

-------------------------------文件-------------------------------
"&File" :: "文件(&F)"
"&New" :: "新建(&N)"
"New &Library" :: "新建元件库(&N)"
"&Open..." :: "打开...(&O)"
"Open &Recent" :: "打开最近编辑的文件(&R)"
"(none)" :: "（无记录）"
"&Clear Recent Files" :: "清空历史记录(&C)"
"&Save" :: "保存(&S)"
"Save &As..." :: "另存为...(&A)"
"&Import from RP File..." :: "从RP文件导入...(&I)"
"Paper Si&ze and Settings..." :: "纸张尺寸与设置...(&Z)"
"&Print..." :: "打印...(&P)"
"Print {0}..." :: "打印{0}..."
"Axure Print Preview" :: "Axure打印预览"
"Export {0} to Image..." :: "导出{0}为图片..."
"&Export All Pages to Image..." :: "导出所有页面为图片...(&E)"
"Export Images" :: "导出图片"
"Target Folder" :: "目标位置"
"Image Format" :: "图片格式"
"&Backup Settings..." :: "自动备份设置...(&B)"
"Re&cover File from Backup..." :: "从备份中恢复...(&C)"
"E&xit" :: "退出(&X)"
----------导入向导----------
"Import Wizard" :: "导入向导"
"Import {0}" :: "导入{0}"
"Check All" :: "全部选中"
"Uncheck All" :: "全部取消"
"Check All Children" :: "选中全部子项"
"Uncheck All Children" :: "取消全部子项"
"Please select the pages you would like to import." :: "请选择您要导入的页面。"
"Please select the masters you would like to import." :: "请选择您要导入的母版。"
"Review Import Actions" :: "检查导入动作"
"Please specify the import action for each of the pages and masters you have selected to import and any masters that they contain." :: "请指定您选择导入的每个页面与母版以及它们内部任何母版的导入操作。"
"You can choose to Replace the target page or master with the source, to Add the page or master, or to Keep an existing master and not import it." :: "您可以选择替换、添加页面或母版的操作，或者保留现有的母版不做导入操作。"
"Action" :: "动作"
"Type" :: "类型"
"Source Name" :: "来源名称"
"Target Name" :: "目标名称"
"Add" :: "添加"
"Replace" :: "替换"
"Keep" :: "保留"
"Add All" :: "添加全部"
"Replace All" :: "替换全部"
"Keep All" :: "保留全部"
"Import Adaptive View Sets" :: "导入自适应视图设置"
"Please select the view sets you would like to import." :: "请选择您要导入的视图设置。"
"Import" :: "导入"
"Name" :: "名称"
"Import All" :: "全部导入"
"Do Not Import Any" :: "全部无需导入"	
"Do Not Import" :: "无需导入"
"Import Generator Configurations" :: "导入生成配置"
"Please select the generators you would like to import." :: "请选择您要导入的生成配置。"
"Import Page Notes Fields" :: "导入页面说明字段"
"Please select the pages notes fields you would like to import." :: "请选择您要导入的页面说明字段。"
"Missing fields are shown in red." :: "丢失的字段以红色显示。"
"Import all notes fields" :: "导入所有说明字段"
"Select the notes fields to import:" :: "选择要导入的说明字段:"	
"Remove existing notes fields (if any imported fields have the same names as existing fields, the data will not be deleted)." :: "删除现有的说明字段。（如果导入字段的名称与现有字段名称相同，字段的数据不会删除。)"
"Import Widget Notes Fields and Sets" :: "导入元件说明字段与设置"
"Please select the widget notes fields and sets you would like to import." :: "请选择您想要导入的元件字段与设置。"
"Import all widget notes fields and sets" :: "导入全部元件说明和设置"
"Select the widget notes fields to import:" :: "选择元件说明字段进行导入："
"Select the sets to import:" :: "选择要导入的设置："
"Remove existing widget notes fields (if any imported fields have the same names as existing fields, the data will not be deleted)." :: "删除现有的元件说明字段。（如果导入字段的名称与现有字段名称相同，字段的数据不会删除。)"
"Import Page Styles" :: "导入页面样式"
"Please select the page styles you would like to import." :: "请选择您要导入的页面样式。"
"Import all styles" :: "导入所有样式"
"Select the default page style to import:" :: "选择默认页面样式进行导入："
"Select the custom page styles to import:" :: "选择自定义页面样式进行导入："
"Import Widget Styles" :: "导入元件样式"
"Please select the widget styles you would like to import." :: "请选择您要导入的元件样式。"
"Select the default widget styles to import:" :: "选择默认元件样式进行导入："
"Select the custom widget styles to import:" :: "选择自定义元件样式进行导入："
"Import Variables" :: "导入变量"
"Please select the variables you would like to import." :: "请选择您要导入的变量。"
"Import all variables" :: "导入所有变量"
"Select the variables to import:" :: "选择要导入的变量："
"Import Summary" :: "导入摘要"
"Please review the import summary and click Finish to import." :: "请检查导入摘要并点击完成按钮开始导入。"
"Skip to End" :: "跳至结束"
"Pages and Masters:{0}" :: "页面与母版：{0}"
"Finish" :: "完成"
"Progress" :: "进度"
"Currently:" :: "目前："
"Importing pages and masters..." :: "正在导入页面与母版..."
"Finishing import..." :: "正在完成导入..."
"Reloading file..." :: "正在重新加载文件..."
--------纸张设置--------
"Paper Size and Settings" :: "纸张尺寸与设置"
"Paper Size:" :: "纸张尺寸："
"Units:" :: "单位："
"mm" :: "毫米"
"Orientation:" :: "方向："
"Portrait" :: "纵向"
"Landscape" :: "横向"
"Width" :: "宽度"
"Height" :: "高度"
"Dimensions:" :: "尺寸："
"Pixel Dimensions:" :: "像素尺寸："
"Margins:" :: "页边距："
"T" :: "上"
"B" :: "下"
"L" :: "左"
"R" :: "右"
"Save as Default" :: "保存为默认设置"
--------打印设置--------
"Enter Preset Name" :: "输入预设名称"
"Duplicate" :: "复制"
"Make Default" :: "创建默认配置"
"Delete" :: "删除"
"Generator Configurations" :: "生成器配置"
"Configuration" :: "配置"
"Generator" :: "生成器"
"Generate" :: "生成"
--------缩放--------
"Diagram to Paper Size" :: "图表到纸张尺寸"
"Full Size" :: "实际尺寸"
"Scale" :: "缩放比例"
"Fit diagram to paper width" :: "适合纸张宽度"
"Scale down only" :: "仅缩小尺寸"
"Fit diagram to single sheet" :: "适合单一页面"
"Paper Size to Printer Paper Size" :: "纸张尺寸到打印机纸张尺寸"
"Scale to fit printer paper size" :: "缩放适应打印机纸张尺寸"
"Edit" :: "编辑"
"Top={0}{1}; Left={2}{1}; Bottom={3}{1}; Right={4}{1};" :: "顶部={0}{1}; 左侧={2}{1}; 底部={3}{1}; 右侧={4}{1};"
"Print all Pages" :: "打印全部页面"
"Print all Masters" :: "打印全部母版"
"Print" :: "打印"
"Recover File from Backup" :: "从备份中恢复文件"
"Show files from last" :: "显示文件范围：最近"
"days" :: "天"
"We recommend that you save the recovered file with a new\nfile name to avoid overwriting your most recently saved file." :: "建议使用新文件名保存恢复的文件，以免覆盖您最近保存的文件。"
"AutoSave Date/Time" :: "自动备份日期/时间"
"File Name" :: "文件名"
"Recover" :: "恢复"
----------偏好----------
"Preferences" :: "偏好设置"
"General" :: "常规"
"UI COLORS" :: "界面颜色"
"Dark UI Mode" :: "黑暗界面"
"Dark" :: "黑暗"
"Light" :: "明亮"
"Use system setting" :: "使用系统设置"
"Enable Backups" :: "启用备份"
"BACKUPS" :: "备份"
"Backup Interval" :: "备份间隔"
"INTERACTIONS" :: "交互"
"Condensed View" :: "简要视图"
"min" :: "分钟"
"Canvas" :: "画布"
"Enable Single Key Shortcuts" :: "启用单键快捷键"
"Hide Canvas Scrollbars" :: "隐藏画布滚动条"
"Grid" :: "网格"
"Spacing:" :: "间距："
"px" :: "像素"
"Intersection" :: "交点"
"Color: " :: "颜色："
"Guides" :: "辅助线"
"Render Guides in Back" :: "底层显示辅助线"
"Always Show Locations in Ruler" :: "始终在标尺中显示位置"
"Global Guide Color: " :: "全局辅助线颜色："
"Page Guide Color: " :: "页面辅助线颜色："
"Print Guide Color: " :: "打印辅助线颜色："
"Page Dimensions Guide Color: " :: "页面尺寸辅助线颜色："
"Widget Snap" :: "元件对齐"
"Snap to Margin" :: "边缘对齐"
"Snap Guide Color: " :: "对齐辅助线颜色："
"Don't ask for name when converting to master" :: "转换为母版时不询问名称"
"Done" :: "完成"

-------------------------------编辑-------------------------------
"&Undo" :: "撤销(&U)"
"&Redo" :: "重做(&R)"
"Cu&t" :: "剪切(&T)"
"&Copy" :: "复制(&C)"
"&Paste" :: "粘贴(&P)"
"&Find" :: "查找(&F)"
"R&eplace" :: "替换(&E)"
"Find and Replace" :: "查找与替换"
"Select &All" :: "全选(&A)"
"&Delete" :: "删除(&D)"
----------查找----------
"Find" :: "查找"
"Find what:" :: "查找内容:"
"Look in:" :: "查找范围:"
"Current Diagram" :: "当前图表"
"Entire Document" :: "整个文档"
"Find options" :: "查找选项"
"Match case" :: "区分大小写"
"Include widget notes" :: "包含元件说明"
"Include page notes" :: "包含页面说明"
"Include panels and repeaters (Find All only)" :: "包含动态面板和中继器 (仅查找全部时)"
"Include masters (Find All only)" :: "包含母版(仅查找全部时)"
"Find Complete." :: "查找完成。"
----------替换----------
"Replace with:" :: "替换内容:"
"Include panels and repeaters (Replace All only)" :: "包含动态面板和中继器 (仅替换全部时)"
"Include masters (Replace All only)" :: "包含母版(仅替换全部时)"
"Find Next" :: "继续查找"
"Find All" :: "查找全部"
"Results" :: "结果"
"Page/Master" :: "页面/母版"
"Warning: Replace All cannot be undone.\nAre you sure you want to continue?" :: "警告：替换之后无法撤销。确定要继续吗？"
"Nothing to replace." :: "没有内容被替换。"
"Completed" :: "完成"
"Replace All complete." :: "替换全部完成。"

-------------------------------视图-------------------------------
"&Toolbars" :: "工具栏(&T)"
"&Panes" :: "功能区(&P)"
"&Reset View" :: "重置视图(&R)"
"&Rulers, Grid, and Guides" :: "标尺 ▪ 网格 ▪ 辅助线"
"&Masks" :: "遮罩(&M)"
"Show &Footnotes" :: "显示脚注(&F)"
"Show &Note and Interaction Markers" :: "显示说明与交互的标记(&N)"
"Show &Interaction Markers" :: "显示交互的标记(&I)"
"Show &Location and Size Tooltip" :: "显示位置尺寸提示(&L)"
"Show &Background" :: "显示背景(&B)"
-------------工具栏-------------
"&Main Toolbar" :: "基本工具(&M)"
"&Customize Main Toolbar..." :: "自定义基本工具列表(&C)"
"&Style Toolbar" :: "样式工具(&S)"
----------自定义工具栏----------
"FILE" :: "文件"
"MODE" :: "模式"
"Connector" :: "连接"
"INSERT OBJECT" :: "插入对象"
"Custom Shapes" :: "自定义形状"
"TOOLS" :: "工具"
"Slice" :: "切割"
"Crop" :: "裁剪"
"ZOOM" :: "缩放"
"ARRANGE" :: "布局"
"Forward" :: "上移一层"
"Backward" :: "下移一层"
"GROUPING" :: "组合"
"ALIGNMENT" :: "对齐"
"Align" :: "对齐"
"DISTRIBUTE" :: "分布"
"Distribute" :: "分布"
"Distribute &Horizontally" :: "水平分布"	
"Distribute &Vertically" :: "垂直分布"
"LOCKING" :: "锁定"
"Lock" :: "锁定"
"Unlock" :: "取消锁定"
"VIEW OPTIONS" :: "视图选项"
"View" :: "视图"
"PUBLISH" :: "发布"
"Spec" :: "文档"
"ACCOUNT" :: "账号"
"User Account" :: "用户账号"
"Show text under icon" :: "显示图标下方的文本"

-------------功能区-------------
"Toggle &Left Panes" :: "开关左侧功能栏(&L)"
"Toggle &Right Panes" :: "开关右侧功能栏(&R)"
"&Pages" :: "页面"
------标尺 ▪ 网格 ▪ 辅助线------
"Show &Rulers" :: "显示标尺(&R)"
"Show Page &Dimensions" :: "显示页面尺寸(&D)"
"S&how Grid" :: "显示网格(&H)"
"&Snap to Grid" :: "网格对齐(&S)"
"Grid Se&ttings..." :: "网格设置...(&T)"
"Show &Global Guides" :: "显示全局辅助线(&G)"
"Show &Page Guides" :: "显示页面辅助线(&P)"
"Show Pr&int Guides" :: "显示打印辅助线(&I)"
"S&nap to Guides" :: "对齐辅助线(&N)"
"&Lock Guides" :: "锁定辅助线(&L)"
"&Create Guides..." :: "创建辅助线(&D)"	
"Create Guides" :: "创建辅助线"	
"Presets:" :: "预设："	
"960 Grid: 12 Column" :: "960像素 网格：12列"	
"960 Grid: 16 Column" :: "960像素 网格：16列"	
"1200 Grid: 12 Column" :: "1200像素 网格：12列"
"1200 Grid: 15 Column" :: "1200像素 网格：15列"	
"# of Columns:" :: "列数："	
"Column Width:" :: "列宽："	
"Gutter Width:" :: "间隙："	
"Rows" :: "多行"	
"# of Rows:" :: "行数："	
"Row Height:" :: "行高："	
"Gutter Height:" :: "间隙："	
"Create as Global Guides" :: "创建为全局辅助线"	
"&Delete All Guides" :: "删除全部辅助线(&C)"	
"G&uide Settings..." :: "辅助线设置...(&U)"
"Snap to &Widgets" :: "元件对齐(&W)"
"W&idget Snap Settings..." :: "元件对齐设置...(&I)"
----------遮罩----------
"Mask &Hidden Objects" :: "隐藏对象(&H)"
"Mask Mas&ters" :: "母版(&T)"
"Mask &Dynamic Panels" :: "动态面板(&D)"
"Mask &Masters" :: "母版(&M)"
"Mask R&epeaters" :: "中继器(&E)"
"Mask Te&xt Links" :: "文本链接(&T)"
"Mask H&ot Spots" :: "热区(&O)"

-------------------------------项目-------------------------------
"&Widget Style Manager..." :: "元件样式管理器...(&W)"
"&Page Style Manager..." :: "页面样式管理器...(&P)"
"Notes &Fields and Sets..." :: "说明字段设置...(&F)"
"Global &Variables..." :: "全局变量设置...(&V)"
"&Adaptive View Sets..." :: "自适应视图...(&A)"
------元件样式管理------
"Widget" :: "元件"
"New Style" :: "新的样式"
"{0} Style Manager" :: "{0}样式管理"
"Up" :: "上移"
"Down" :: "下移"
"Move Up" :: "向上移动"
"Move Down" :: "向下移动"
"Heading 4" :: "四级标题"
"Heading 5" :: "五级标题"
"Heading 6" :: "六级标题"
"Form Hint" :: "表单提示"
"Form Disabled" :: "表单禁用"
"Flow Shape" :: "流程形状"
"Check the properties to override with this style." :: "选择属性替换样式。"
"Font" :: "字体"
"Typeface" :: "类型"
"Font Size" :: "字号"
"Font Color" :: "字色"
"Opacity (%)" :: "不透明"
"(click to toggle {0})" :: "(点击切换{0})"
"Select" :: "选择"
"Line Color" :: "线段颜色"
"Border Thickness" :: "边框宽度"
"Border Pattern" :: "边框类型"
"Border Visibility" :: "边框可见性"
"Corner Radius" :: "圆角半径"
"Corner Visibility" :: "圆角可见性"
"Inner Shadow" :: "内部阴影"
"Text Shadow" :: "文字阴影"
"Alignment" :: "对齐"
"Vert Align" :: "垂直对齐"
"Left Pad" :: "左侧填充"
"Right Pad" :: "右侧填充"
"Top Pad" :: "顶部填充"
"Bottom Pad" :: "底部填充"
"Line Spacing" :: "行间距"
"Character Spacing" :: "字间距"
"Text Baseline" :: "文本基线"
"Text Transform" :: "文本变形"
"Image Filter" :: "图像滤波"
"Reset" :: "重置"
"Adjust Color" :: "调整颜色"
"Hue:" :: "色调："
"Saturation:" :: "饱和度："
"Brightness:" :: "亮度："
"Contrast:" :: "对比度："
"Copy formatting from {0}." :: "从{0}复制格式。"
------页面样式管理------
"New Page Style" :: "新的页面样式"
"Page Align" :: "页面排列"
"(browser only)" :: "（仅浏览器中有效）"
"Color" :: "颜色"
"Select image" :: "选择图片"
"top left" :: "左上"
"top right" :: "右上"
"center" :: "居中"
"bottom left" :: "左下"
"bottom right" :: "右下"
"No Repeat" :: "不重复"
"Image Repeat" :: "重复图片"
"Repeat Horizontal" :: "水平重复"
"Repeat Vertical" :: "垂直重复"
"Stretch to Cover" :: "填充"
"Stretch to Contain" :: "适应"
"Stretch Horizontal and Vertical" :: "拉伸"
------说明字段设置------
"Notes Fields and Sets" :: "说明字段设置"
"Edit Widget Notes" :: "编辑元件说明"
"Customize Widget Fields" :: "自定义元件字段"
"Select List" :: "选项列表"
"Field" :: "字段"
"Note" :: "说明"
"New Note" :: "新建说明"
"SelectList" :: "选项列表"
"Are you sure you want to delete this field?\nIt cannot be undone." :: "您确定要删除这个字段吗？\n此操作执行后无法撤销。"
"Field Settings" :: "字段设置"
"Fields that have settings will\nhave options appear here" :: "可以设置的字段将在此处出现选项。"
"Select List Options" :: "选项列表的选项"
"One value per line" :: "每行输入一个选项值"
"Edit Widget Fieldsets" :: "编辑元件字段集"
"Edit Fieldsets" :: "编辑字段集"
"Fieldsets are groups of fields that are displayed together" :: "字段集由一起显示的字段组成"
"Fields in Set" :: "字段集中的字段"
"All Fields" :: "全部字段"
"New Set" :: "新建字段集"
"Edit Page Notes" :: "编辑页面说明"
"Customize Page Fields" :: "自定义页面字段"
"Page notes appear above widget notes on every page" :: "页面说明出现在每个页面上的元件说明上。"
"Page Overview" :: "页面概述"
"Are you sure you want to delete this category?\nIt cannot be undone." :: "您确定要删除这个类别吗？\n此操作执行后无法撤销。"
--------全局变量--------
"Global Variables" :: "全局变量"
"Create variables to store data that persists from page to page in the browser. Recommend using 25 or less variables if viewing protoypes in Microsoft IE." :: "创建全局变量用于浏览器中页面切换时存储数据。如果在IE浏览器浏览原型，推荐使用25个或更少的变量。"
"Variable names must be alphanumeric, less than 25 characters long, and contain no spaces." :: "变量名必须是字母数字，少于25个字符，并且不能包含空格。"
"Variable Name" :: "变量名称"
"Default Value" :: "默认值"
"At least one variable must exist in the project." :: "项目中至少保留一个变量。"
"Are you sure you want to delete this variable?\nIt cannot be undone." :: "您确定要删除这个变量吗？\n此操作执行后无法撤销。"

-------自适应视图-------
"Adaptive View Sets" :: "自适应视图设置"
"Adaptive View Set" :: "自适应视图设置"
"Adaptive Views" :: "自适应视图"
"Base" :: "基本"
"Presets" :: "预设"
"any" :: "任何"
"New View" :: "新建视图"
"Inherit from" :: "继承"
"Deleting a view cannot be undone.\r\n\r\nWould you like to continue?" :: "删除视图将不能撤销。\r\n\r\n您想继续吗？"
"Are you sure you want to delete this adaptive view set?\nIt cannot be undone." :: "您确定要删除这个自适应视图设置吗？\n此操作执行后无法撤销。"

-------------------------------布局-------------------------------
"&Group" :: "组合(&G)"
"&Ungroup" :: "取消组合(&U)"
"Bring to Fron&t" :: "置于顶层(&T)"
"Send to Bac&k" :: "置于底层(&K)"
"Bring &Forward" :: "上移一层(&F)"
"Send &Backward" :: "下移一层(&B)"
"Al&ign" :: "对齐(&I)"
"&Distribute" :: "分布(&D)"
"Loc&king" :: "锁定(&K)"
"Create &Master" :: "转换为母版(&M)"
"Create &Dynamic Panel" :: "转换为动态面板(&D)"
"&Reflow All Connectors" :: "重置全部连接线(&R)"
"Manage Raised Event&s (Masters Only)..." :: "管理母版引发的事件(&S)"
----------锁定----------
"&Lock Location and Size" :: "锁定位置和尺寸(&L)"
"&Unlock Location and Size" :: "取消锁定位置和尺寸(&U)"	
--------引发事件--------
"Manage Raised Events" :: "管理母版引发的事件"
"NewEvent" :: "新建事件"
"Are you sure you want to delete this event?\nIt cannot be undone." :: "您确定要删除这个事件吗？\n此操作执行后无法撤销。"
-------------------------------发布-------------------------------
"&Preview" :: "预览(&P)"
"Preview &Options..." :: "预览选项...(&O)"
"Publish to &Axure Share..." :: "发布到Axure Share(&A)"
"&Generate HTML Files..." :: "生成HTML文件...(&H)"
"&Regenerate Current Page to HTML" :: "重新生成当前页面的HTML文件(&R)"
"Generate &Word Specification{0}..." :: "生成Word说明书{0}...(&W)"
"&More Generators and Configurations..." :: "更多生成器和配置文件(&M)"
--------预览选项--------
"Preview Options" :: "预览选项"
"Select the HTML configuration to preview" :: "选择预览HTML的配置文件"
"{0} (default)" :: "{0}（默认）"
"Configure" :: "配置"
"Open With" :: "打开"
"Browser" :: "浏览器"
"Default browser" :: "默认浏览器"
"Do not open" :: "不打开"
"Internet Explorer" :: "IE浏览器"
"Chrome" :: "谷歌浏览器"
"Firefox" :: "火狐浏览器"
"Player" :: "播放器"
"With Pages open" :: "打开页面列表"	
"With Player minimized" :: "最小化"
--------发布项目--------
"Publish Project" :: "发布项目"
"Publish to Share" :: "发布到共享"
"Use Default" :: "使用默认"
"Publish to new URL" :: "发布为新的链接"
"Project Name" :: "项目名称"
"(Optional)" :: "（选填）"
"Replace Existing Project" :: "替换已有项目"
"Uploading" :: "上传中..."
"Waiting for confirmation of upload..." :: "等待上传确认..."
"Generating" :: "生成中..."
"Generating Pages..." :: "正在生成页面..."
"Generating {0} ..." :: "正在生成{0}..."
"Launching browser..." :: "正在启动浏览器..."
"Your project is being published to" :: "您的项目正在发布到"
"Close (Publishing will continue in background)" :: "关闭（发布将继续在后台进行）"
"Publish Complete" :: "发布完成"
"Your project has been published to" :: "您的项目已经发布到"
"Allow Comments" :: "允许评论"
"Open browser after publishing" :: "发布之后在浏览器中打开"
"The browser could not be opened.\n\nOpen {0} or select another browser in Publish->Generate HTML Files." :: "浏览器无法打开。\n\n请在生成HTML时打开{0}或选择其他浏览器。"
"The destination folder is not valid.\nPlease select another folder." :: "文件夹位置无效。\请选择其它文件夹！"
----------页面----------
"Generate all Pages" :: "生成全部页面"
----------说明----------
"Widget Notes" :: "元件说明"
"Include widget note markers" :: "页面中包含元件说明标记"
"Include widget notes in sidebar" :: "工具栏中包含元件说明"
"Use name instead of note icon" :: "使用名称而不是说明图标"
"Select and order widget notes fields" :: "选择并排列元件说明字段"
"Widget Text" :: "元件文字"
"Page Notes" :: "页面说明"
"Show page notes names" :: "显示页面说明的名称"
"Select and order page notes fields" :: "选择页面说明字段"
----------交互----------
"Case Behavior" :: "情形动作"
"Always show case names" :: "始终显示情形名称"
"Show case names only with multiple cases" :: "只在同一事件包含多种情形时显示情形名称"
"Never show case names" :: "从不显示情形名称（自动执行首个情形）"
"Widgets with reference pages" :: "元件引用页面"
"Clicking the widget opens the reference page" :: "点击元件时打开引用页面"
"Include icon to open the reference page in new window" :: "包含在新窗口打开引用页面的图标"
----------字体----------
"Add Font" :: "添加字体"
"Web Fonts" :: "网络字体"
"Font Label" :: "字体标签"
"Delete Font" :: "删除字体"
"URL of css file" :: "CSS文件的URL"
"Click the 'Add Font' button to add\nweb and CSS font definitions" :: "点击添加字体按钮添加Web字体"
"Font Mappings" :: "字体映射"
"Add Mapping" :: "添加映射"
"Font style (optional)" :: "字体样式（可选）"
"Map to font family" :: "映射的字体"
"font-family" :: "字体系列"
"font-weight" :: "字体加粗"
"font-style" :: "字体样式"
"Delete Mapping" :: "删除映射"
"Click the 'Add Mapping' button\nto add a new font mapping" :: "点击添加映射按钮添加字体映射"
"Publish" :: "发布"
------生成说明文档------
"Generate Specification" :: "生成说明书"
----------页面----------
"Pages section" :: "页面部分"
"Include pages section" :: "包含页面部分"
"Include pages section header" :: "包含页面部分标题"
"Pages section header" :: "页面部分标题"
"Sitemap List" :: "站点地图列表"
"Include sitemap list" :: "包含站点地图列表"
"Include sitemap list header"  :: "包含站点地图列表标题"
"Page Tree" :: "页面树目录"
"Sitemap header" :: "站点地图标题"
"Pages to Generate" :: "生成页面"
"Generate all pages" :: "生成全部页面"
----------母版----------
"Masters Section" :: "母版部分"
"Include masters section" :: "包含母版部分"
"Include masters section header" :: "包含母版部分标题"
"Masters section header" :: "母版部分标题"
"Master List" :: "母版列表"
"Include master list" :: "包含母版列表"
"Include master list header" :: "包含母版列表标题"
"Master list header" :: "母版列表标题"
"Only list generated masters" :: "只包含生成的母版"
"Masters to Generate" :: "生成母版"
"Only generate masters used on generated pages" :: "仅生成页面时生成母版"
"Do not generate masters set to break away" :: "不生成已经脱离的母版"
"Generate all masters" :: "生成所有母版"
"Document masters in pages section" :: "在页面部分中记录母版"
"Only document first use of master" :: "仅首次使用母版时记录"
"Exclude master notes" :: "不包含母版说明"
"Edit Views" :: "编辑视图"
"Check to make location, size, and style changes affect all views" :: "选中后，位置、尺寸和样式更改将会影响所有视图。"
"Uncheck to make location, size, and style changes affect only the current and inheriting views" :: "取消选中后，位置、尺寸和样式更改仅影响当前视图和继承视图。"
----------属性----------
"Show page notes names as headers" :: "显示页面说明名称作为标题"
"Use heading basic style" :: "使用标题基本样式"
"Select and drag to order page note fields" :: "选择并拖动排序页面说明字段"
"Page Interactions" :: "页面交互"
"Include page interactions" :: "包含页面交互"
"Page interactions header" :: "页面交互标题"
"Section header" :: "部分标题"
"Use basic heading style" :: "使用标题基本样式"
"Masters List" :: "母版列表"
"Include list of masters used on page/master" :: "包含母版在页面或母版中使用情况的列表"
"Masters used header" :: "母版使用情况标题"
"Masters Used" :: "母版使用情况"
"Master Usage Report" :: "母版使用情况报告"
"Include master usage report (masters only)" :: "包含母版使用情况报告（仅限于母版）"
"Usage Report" :: "使用情况报告"
"Pages header" :: "页面标题"
"Used on pages:" :: "页面使用情况："
"Used on pages header" :: "页面标题的使用情况"
"Masters header" :: "母版标题"
"Used on masters:" :: "母版使用情况："
"Used on masters header" :: "母版标题的使用情况"
"Panels and Repeaters" :: "动态面板和中继器"
"Include panels and repeaters" :: "包含动态面板和中继器"
----------快照----------
"Include screenshot" :: "包含屏幕快照"
"Screenshot header" :: "屏幕快照标题"
"User Interface" :: "用户界面"
"Show footnotes on screenshot" :: "屏幕快照中显示脚注"
"Exclude footnotes not in tables" :: "不包含不在元件表中的脚注"
"Put border on screenshot" :: "显示屏幕快照边框"
"Do not scale footnotes with screenshot" :: "脚注编号不随屏幕快照缩放"
"Apply default OnPageLoad and widget OnLoad cases" :: "使用默认的“页面载入时”和元件“载入时”情形"
"Include submenus" :: "包含子菜单"
"Include expanded trees" :: "包含展开的树"
"Show default pages in inline frames" :: "在内联框架中显示默认页面"
"Do not apply background styles" :: "不使用背景样式"
"Max width as % of page/column width:" :: "最大宽度相对于页面/列宽度的比例(%)"
"Max height as % of page height:" :: "最大高度相对于页面高度的比例(%)"
"Allow screenshots to split across pages (single column only)" :: "允许跨页时分割屏幕快照(只用于单列)"
----------元件----------
"Include Widget Tables" :: "包含元件表"
"Widget Table" :: "元件表"
"Column Heading Labels"
"Table header" :: "表格标题"
"Select and drag to order the columns:" :: "选择并拖动排序列名:"
"Footnote" :: "脚注"
"Widget ToolTip" :: "元件工具提示"
"Row Filters" :: "行筛选"
"Include widgets without notes" :: "包含没有说明的元件"
"Remove rows with only footnote and name data" :: "删除只有脚注和名称的行"
"equals" :: "=="
"does not equal" :: "!="
"contains" :: "包含"
"does not contain" :: "不包含"
"is one of" :: "含在"
"is not one of" :: "不含在"
"Column Filters" :: "列筛选"
"Remove empty columns" :: "移除空列"
"Column Heading Labels" :: "列标题"
"Object Id" :: "对象ID"
"Tool Tip" :: "工具提示"
"ToolTip" :: "工具提示"
"List Option" :: "列表选项"
"List Options" :: "列表选项"
"Location and Size" :: "位置和尺寸"
"Formatting" :: "格式"
"Allow rows to break across pages" :: "允许行跨页面"
----------布局----------
"Single column" :: "单列"
"Two column" :: "双列"
"Left column width %" :: "左侧列宽比例"
"Drag to reorder the specification content for each page" :: "拖动为每个页面重排说明内容"
"(Page Note)" :: "（页面说明）"
"(Page Interactions)" :: "（页面交互）"
"(Screenshot)" :: "（屏幕快照）"
"(Widget Table)" :: "（元件表）"
"(Masters List)" :: "（模板列表）"
"(Master Usage)" :: "（母版使用情况）"
----------模板----------
"The text [[AXURE CONTENT]] will be replaced with the generated documentation.\nBe sure to save and close the Input File before generating." :: "文件中为[[AXURE CONTENT]]的文本内容将被替换。\n生成之前请务必保存并关闭写入的文件。"
"Template file (.docx)" :: "模板文件(.docx)"
"New Template" :: "新建模板"
"Applied Word Styles" :: "应用的Word样式"
"Heading Basic" :: "基本标题"
"Table Header" :: "表格标题"
"Table Cell Text" :: "单元格文字"
"Normal" :: "常规"
"AxureHeading1" :: "Axure一级标题"
"AxureHeading2" :: "Axure二级标题"
"AxureHeading3" :: "Axure三级标题"
"AxureHeading4" :: "Axure四级标题"
"AxureHeading 1" :: "Axure一级标题"
"AxureHeading 2" :: "Axure二级标题"
"AxureHeading 3" :: "Axure三级标题"
"AxureHeading 4" :: "Axure四级标题"
"AxureHeadingBasic" :: "Axure基本标题"
"AxureTableStyle" :: "Axure表格样式"
"AxureTableHeaderText" :: "Axure表格标题文字"
"AxureTableNormalText" :: "Axure表格常规文字"
"Built-In Word Styles" :: "Word内置样式"
"Default Axure Styles" :: "Axure默认样式"
--------新建模板--------
"Create New Template" :: "新建模板"
"Configure and create your new template below." :: "在下方配置并新建模板。"
"Paper size:" :: "纸张尺寸"
"Orientation" :: "方向"
"Numbered Headings" :: "标题序号"
"Numbered" :: "有序号"
"Not Numbered" :: "无序号"
"Single Column" :: "单列"
"Two Column" :: "双列"
"Columns can be configured in the Layout section." :: "列能够在“布局”中配置。"
"The template properties and content can be customized in Microsoft Word by clicking the Edit link after creating the template." :: "模板属性和内容可以在“Word模板”中点击“编辑”按钮进行自定义。"
--------CSV报告---------
"Generate CSV Report" :: "生成CSV报告"
"Generate Page Report" :: "生成页面报告"
"Generate Widget Report" :: "生成元件报告"
"Select and drag to order the fields that will be\nincluded in the report for each page and master" :: "选择并拖动，为报告中每个页面和母版包含的字段排序。"
"Page/Master Id" :: "页面或母版ID"
"Page/Master" :: "页面或母版"
"Page/Master Name" :: "页面或母版名称"
"Page/Master Number" :: "页面或母版编号"
"Master Behavior" :: "母版行为"
"Select and drag to order the fields that will be\nincluded in the report for each widget" :: "选择并拖动，为报告中每个元件包含的字段排序。"
"Footnote Number" :: "脚注编号"
"Create CSV Report" :: "创建CSV报告"
"The page report path is not valid.\nPlease try again." :: "页面报告的存储路径无效，请重试！"
"The destination folder {0} does not exist.\nWould you like to create it?" :: "目标文件夹不存在。\n是否创建此文件夹？"
--------生成配置--------
"Word Specification (.docx)" :: "Word说明书(.docx)"
"CSV Reports" :: "CSV报告"
"Add configuration" :: "添加配置"
"Edit configuration" :: "编辑配置"
"New Configuration" :: "新建配置"
"Save" :: "保存"
"Manage Configurations" :: "管理配置"
"Set as default" :: "设为默认"
"Remove: default configurations cannot be deleted." :: "默认配置不能删除。"
"Set as default: only Print, Specification, and HTML can be set as default" :: "仅限打印/说明/HTML配置设为默认。"

-------------------------------账户-------------------------------
"Log &in to your Axure account..." :: "登录您的账户(&I)"
"Log &out" :: "退出(&O)"
"Proxy settings" :: "代理设置"
"&Proxy Settings..." :: "代理设置(&P)"
"Enable proxy" :: "启用代理"
"Proxy server" :: "代理服务器"
"Copy system proxy settings" :: "使用系统代理设置"
"Could not find compatible system proxy settings.\nPlease make sure the proxy settings are enabled." :: "找不到兼容的系统代理设置。\n请确保已启用代理设置。"

-------------------------------帮助-------------------------------
"&Online Training..." :: "中国在线学习..."
"&Search Online Help..." :: "中国线下培训..."
"http://www.axure.com/training" :: "http://www.chanpinban.com"
"http://www.axure.com/search" :: "https://www.axure.com.cn/product/training/"
"Discuss on the Axure &Forums..." :: "进入Axure论坛...(&F)"
"Submit Feed&back or Bug..." :: "提交意见或软件错误...(&B)"
"&Welcome Screen..." :: "打开欢迎界面...(&W)"
"&Manage License..." :: "管理授权...(&O)"
"Start Enterprise Trial" :: "开启企业版测试"
"&Check for Updates..." :: "检查更新...(&C)"
"&About {0}..." :: "关于Axure RP..."
"&Thanks..." :: "感谢...(&T)"

--------提交反馈--------
"Submit Feedback" :: "提交反馈"
"Please submit your questions and requests below." :: "请在下方提交您的问题和建议。"
"Entering your email address will give us an opportunity to respond to your feedback." :: "输入您的邮箱地址，方便我们答复您的反馈。"
"Email (Optional):" :: "邮箱地址(可选)："
"Send me a copy" :: "同时发到我的邮箱"
"Message:" :: "反馈内容: "
--------管理授权--------
"If you purchased a license key, enter it below. If you have a subscription, click \"Subscription\" and enter the email that you signed up with for your Axure subscription." :: "如果您购买了授权密钥，请在下面输入。如果您已订阅，请点击“订阅”，然后输入您进行Axure订阅时注册的电子邮件。"
"No subscription is assigned to your account." :: "您的账户尚未订购。"
--------检查更新--------
"CHECKING FOR UPDATES" :: "正在检查更新..."
"Axure RP Update" :: "更新Axure RP"
"Current Version: {0}" :: "当前版本: {0}"
"{0} is up to date." :: "{0} 已是最新版本"
"Check for updates when Axure RP starts" :: "Axure RP启动时检查更新"
"Include beta channel builds" :: "包含测试版更新内容"
"Skip This Update" :: "跳过此次更新"
"DOWNLOADING LATEST UPDATE" :: "下载最新版本"
"Please wait for a few moments while we download the update." :: "正在下载更新版本,请稍候..."
"READY TO INSTALL UPDATE" :: "准备安装更新"
"The update has been downloaded and is ready to be installed." :: "更新内容已下载完成，准备进行更新。"
"Install and Relaunch" :: "安装并重新启动"
"ERROR CHECKING FOR UPDATES" :: "检查更新发生错误"
"There was an error checking for updates. Please ensure that you are connected to the internet or try again in a few moments." :: "检查更新发生了错误！请确保您已连接到网络或者先抽袋烟再重试！"
"Try Again" :: "重试"
-----------------------------快捷功能-----------------------------
"Cut" :: "剪切"
"Copy" :: "复制"
"Paste" :: "粘贴"
"Selection Mode" :: "选择模式"
"Connect" :: "连接"
"Select Intersected" :: "相交选中"
"Select Contained" :: "包含选中"
"Connector Tool" :: "连线工具"
"Insert" :: "插入"
"Pen" :: "绘画"
"Rectangle" :: "矩形"
"Oval" :: "圆形"
"Line" :: "线段"
"Text" :: "文本"
"Shapes" :: "形状"
"Point" :: "点"
"Edit Points" :: "编辑点"
"Front" :: "顶层"
"Back" :: "底层"
"Group" :: "组合"
"Ungroup" :: "取消组合"
"Zoom" :: "缩放"
"Fit Selection" :: "缩放适应选择内容"
"Fit All" :: "缩放适应全部内容"
"Left" :: "左侧"
"Align &Left" :: "左侧对齐"
"Center" :: "居中"
"Align &Center" :: "居中对齐"
"Right" :: "右侧"
"Align &Right" :: "右侧对齐"
"Top" :: "顶部"
"Align &Top" :: "顶部对齐"
"Middle" :: "中部"
"Align &Middle" :: "中部对齐"
"Bottom" :: "底部"
"Align &Bottom" :: "底部对齐"
"Horizontal" :: "水平"
"Vertical" :: "垂直"
"Toggle Left Panes" :: "开关左侧功能栏"
"Toggle Right Panes" :: "开关右侧功能栏"
"Preview" :: "预览"
"Share" :: "共享"
----------样式----------
"Manage Widget Styles" :: "管理元件样式"
"Text Color" :: "文本颜色"
"Bold" :: "粗体"
"Bold ({0})" :: "粗体({0})"
"Italic" :: "斜体"
"Italic ({0})" :: "斜体({0})"
"Underline" :: "下划线"
"Underline ({0})" :: "下划线({0})"
"Bulleted List" :: "项目符号"
"Align Left" :: "左侧对齐"
"Align Left ({0})" :: "左侧对齐({0})"
"Align Center" :: "居中对齐"
"Align Center ({0})" :: "居中对齐({0})"
"Align Right" :: "右侧对齐"
"Align Right ({0})" :: "右侧对齐({0})"
"Justify" :: "两端对齐"
"Align Top" :: "顶部对齐"
"Align Middle" :: "中部对齐"
"Align Bottom" :: "底部对齐"
"Fill:" :: "填充："
"Fill Color" :: "填充颜色"
"Outer Shadow" :: "外部阴影"
"Border:" :: "线段："
"Thickness" :: "线宽"
"Line Pattern" :: "线段类型"
"Arrow Style" :: "箭头样式"
"Hidden" :: "隐藏"
"Maintain aspect ratio" :: "锁定宽高比例"
"Maintain Aspect Ratio" :: "锁定宽高比例"
------------填充------------
"Solid" :: "单色"
"Linear" :: "线性"
"Radial" :: "径向"
"Color Picker" :: "颜色选择器"
"Color Space" :: "彩色空间"
"Favorites" :: "喜欢"
"Recents" :: "最近"
"Suggested" :: "建议"
------------阴影------------
"Shadow" :: "阴影"
"Blur" :: "模糊"
"Spread" :: "扩展"

-------------------------------模块-------------------------------
"Pages" :: "页面"
"Widgets" :: "元件"
"Outline" :: "概要"
"Libraries" :: "元件"
"Masters" :: "母版"
"Style" :: "样式"
"Interactions" :: "交互"
"Notes" :: "说明"

-------------------------------页面-------------------------------
"Search" :: "搜索"
"Search..." :: "搜索..."
"Add Page" :: "添加页面"
"Add Folder" :: "添加文件夹"

-------------------------------概要-------------------------------
"Sort and Filter" :: "排序与筛选"
"All Widgets" :: "全部元件"
"Dynamic Panels" :: "动态面板"
"Dynamic Panels or Masters" :: "动态面板或母版"
"Has Name" :: "具有名称"
"Has Footnote" :: "具有脚注"
"Placed or Unplaced" :: "显示或隐藏"
"Placed" :: "显示"
"Unplaced" :: "隐藏"
"Sort Front to Back" :: "顶层至底层排序"
"Sort Back to Front" :: "底层至顶层排序"

-------------------------------元件-------------------------------
"Loading {0}" :: "{0} 加载中..."
"Add Library" :: "添加元件库"
"Add Image Folder" :: "添加图片文件夹"
"Search Library" :: "搜索元件库"
"All Libraries" :: "全部元件库"
"Add Widget Library" :: "添加元件库"
"This library is already loaded and will be refreshed." :: "此元件库已经被加载并且将会被刷新。"
"The library " :: "元件库"
" will be added to your available libraries." :: "将添加到您的元件库列表中。"
"Widget Library Already installed" :: "元件库已安装完成。"
"Also move library file to the Axure application's directory" :: "移动元件库文件到Axure安装目录中"
"Keep library files in current location" :: "保留元件库文件在当前位置"
"Edit Library" :: "编辑元件库"
" is aready in your available libraries. Your libraries are automatically updated and do not need to be reinstalled.\n\nIf you’d like to edit the library instead, click \"Edit Library\" below or \"File…Open\" in the Axure RP application." :: "已经添加到您的元件库列表中。您的元件库会自动更新，无需重新加载。\n\n如果您想编辑库，请单击下方的“编辑元件库”，或者通过Axure RP应用程序中的“文件-打开”进行编辑。"
"Select the directory that contains the images you would like to use in RP." :: "请选择需要在Axure RP中所使用图片的目录。"
----------选项----------
"Options" :: "选项"
"&Get Libraries..." :: "获取元件库...(&G)"
"&Edit Library" :: "编辑元件库(&E)"
"&Find on Disk" :: "磁盘中查找(&F)"
"&Remove Library" :: "移除元件库(&R)"
"&Open in {0}" :: "打开{0}(&O)"
-------默认元件库-------
"Common" :: "基本元件"
"Box 1" :: "矩形1"
"Box 2" :: "矩形2"
"Box 3" :: "矩形3"
"Ellipse" :: "圆形"
"Image" :: "图片 "
"Placeholder" :: "占位符"
"Button" :: "按钮"
"Primary Button" :: "主要按钮"
"Link Button" :: "链接按钮"
"Heading 1" :: "一级标题"
"Heading 2" :: "二级标题"
"Heading 3" :: "三级标题"
"Label" :: "文本标签"
"Paragraph" :: "文本段落"
"Horizontal Line" :: "水平线"
"Vertical Line" :: "垂直线"
"Hot Spot" :: "热区"
"Dynamic Panel" :: "动态面板"
"Inline Frame" :: "内联框架"
"Repeater" :: "中继器"
"Forms" :: "表单元件"
"Text Field" :: "文本框"
"Text Fields" :: "文本框"
"Text Area" :: "文本域"
"Droplist" :: "下拉列表"
"List Box" :: "列表框 "
"Checkbox" :: "复选框"
"Radio Button" :: "单选按钮"
"HTML Button" :: "提交按钮"
"Menus and Table" :: "菜单|表格"
"Tree" :: "树"
"Table" :: "表格"
"Table Cell" :: "单元格"
"Classic Menu - Horizontal" :: "水平菜单"
"Classic Menu - Vertical" :: "垂直菜单"	
"Menu" :: "菜单"	
"Menu Item" :: "菜单项"	
"Markup" :: "标记元件"
"Snapshot" :: "快照"
"Horizontal Arrow" :: "水平箭头"
"Vertical Arrow" :: "垂直箭头"
"Sticky 1" :: "便签1"
"Sticky 2" :: "便签2"
"Sticky 3" :: "便签3"
"Sticky 4" :: "便签4"
"Circle Marker" :: "圆形标记"
"Drop Marker" :: "水滴标记"
-------流程元件库-------
"Rounded Rectangle" :: "圆角矩形"
"Stacked Rounded" :: "圆角矩形组"
"Subroutine/Predefined Process" :: "子程序/预定义程序"
"Delay" :: "延迟"
"Document" :: "文档"
"Multi-Document" :: "多文档"
"Off Page Connector" :: "关闭页面连接"
"Manual Input" :: "手动输入"
"Stored Data" :: "数据存储"
"Internal Storage (RAM)" :: "内部存储(RAM)"
"Offline Storage" :: "离线存储"
"Display" :: "显示"
"Sort" :: "排序"
"Collate" :: "检查"
"Summing Junction" :: "求和连接"
"Logical Or" :: "逻辑或"
"Magnetic Tape" :: "磁带"
"Punched Tape" :: "穿孔纸带"
"Punched Card" :: "穿孔卡片"
"Keying" :: "键控"
-------图标元件库-------
"Web Application" :: "Web应用"
"Anchor" :: "锚"
"Download" :: "下载"
"Filter" :: "过滤"
"Fire" :: "火苗"
"Folder" :: "文件夹"
"Refresh" :: "刷新"
"Server" :: "服务器"
"Shower" :: "淋浴"
"Remove" :: "移除"
"Clipboard" :: "剪贴板"
"Columns" :: "多栏"
"Indent" :: "降级"
"Link" :: "链接"
"Outdent" :: "升级"
"Repeat" :: "重复"
"Undo" :: "撤销"
"Expand" :: "展开"
"Accessibility" :: "辅助功能"
"Hand" :: "手势"
"Transportation" :: "运输工具"
"Gender" :: "性别"
"File Type" :: "文件类型"
"Form Control" :: "表单控件"
"Payment" :: "支付"
"Chart" :: "图表"
"Currency" :: "货币"
"Text Editor" :: "文本编辑"
"Directional" :: "方向"
"Video Player" :: "视频播放"
"Brand" :: "商标"
"Medical" :: "医学"
"Wheelchair Alt" :: "运动轮椅"
"User Md" :: "医学博士"
"Youtube Play" :: "Youtube播放"
"Btc" :: "比特币"
"Cny" :: "人民币"
"Eur" :: "欧元"
"Gbp" :: "英镑"
"Gg" :: "英镑"
"Gg Circle" :: "英镑-圆形"
"Ils" :: "谢克尔"
"Inr" :: "卢比"
"Jpy" :: "日元"
"Krw" :: "韩元"
"Rmb" :: "人民币"
"Rub" :: "卢布"
"Ruble" :: "卢布"
"Shekel" :: "谢克尔"
"Sheqel" :: "谢克尔"
"Try" :: "里拉"
"Usd" :: "美元"
"File Pdf O" :: "PDF文件-空"
"File Powerpoint O" :: "PPT文件-空"
"Cc" :: "闭合字幕"
"American Sign Language Interpreting" :: "美语手语翻译"
"Asl Interpreting" :: "手语翻译"
"Assistive Listening Systems" :: "辅助听力系统"
"Audio Description" :: "音频描述"
"Blind" :: "盲人"
"Braille" :: "盲文"
"Deaf" :: "聋人"
"Deafness" :: "耳聋"
"Hard Of Hearing" :: "耳背"
"Low Vision" :: "低视力"
"Question Circle O" :: "问题-圆形-空"
"Sign Language" :: "手语"
"Signing" :: "手语"
"Tty" :: "打字机"
"Universal Access" :: "万能辅助"
"Volume Control Phone" :: "音控电话"
"Address Book" :: "通讯录"
"Address Book O" :: "通讯录-空"
"Address Card" :: "地址卡"
"Address Card O" :: "地址卡-空"
"Bath" :: "浴室"
"Bathtub" :: "浴缸"
"Battery" :: "电池"
"Drivers License" :: "驾驶证"
"Drivers License O" :: "驾驶证-空"
"Envelope Open" :: "信封-打开"
"Envelope Open O" :: "信封-打开-空"
"Handshake O" :: "握手-空"
"index" :: "主页"
"I Cursor" :: "光标"
"Id Badge" :: "身份证件"
"Id Card" :: "身份证"
"Id Card O" :: "身份证-空"
"Microchip" :: "微芯片"
"Podcast" :: "播客"
"Qrcode" :: "二维码"
"Rss" :: "RSS聚合内容"
"Rss Square" :: "RSS-方形"
"S15" :: "素坤逸15巷"
"Snowflake O" :: "雪花-空"
"Thermometer" :: "温度计"
"Thermometer" :: "温度计0"
"Thermometer 1" :: "温度计1"
"Thermometer 2" :: "温度计2"
"Thermometer 3" :: "温度计3"
"Thermometer 4" :: "温度计4"
"Thermometer Empty" :: "温度计-空"
"Thermometer Full" :: "温度计-满"
"Thermometer Half" :: "温度计-半"
"Thermometer Quarter" :: "温度计1/4"
"Thermometer Three Quarters" :: "温度计3/4"
"Times Rectangle" :: "乘号-矩形"
"Times Rectangle O" :: "乘号-矩形-空"
"User Circle" :: "用户-圆形"
"User Circle O" :: "用户-圆形-空"
"User O" :: "用户-空"
"Vcard" :: "名片"
"Vcard O" :: "名片-空"
"Tv" :: "电视"
"Window Close" :: "关闭窗口"
"Window Close O" :: "关闭窗口-空"
"Window Maximize" :: "最大化窗口"
"Window Minimize" :: "最小化窗口"
"Window Restore" :: "恢复窗口"
"Adjust" :: "校正"
"Align Justify" :: "两端对齐"
"Ambulance" :: "救护车"
"Angle Double Down" :: "双角符-下"
"Angle Double Left" :: "双角符-左"
"Angle Double Right" :: "双角符-右"
"Angle Double Up" :: "双角符-上"
"Angle Down" :: "单角符-下"
"Angle Left" :: "单角符-左"
"Angle Right" :: "单角符-右"
"Angle Up" :: "单角符-上"
"Archive" :: "存档"
"Area Chart" :: "面积图"
"Arrow Circle Down" :: "箭头-圆形-上"
"Arrow Circle Left" :: "箭头-圆形-左"
"Arrow Circle O Down" :: "箭头-圆圈-下"
"Arrow Circle O Left" :: "箭头-圆圈-左"
"Arrow Circle O Right" :: "箭头-圆圈-右"
"Arrow Circle O Up" :: "箭头-圆圈-上"
"Arrow Circle Right" :: "箭头-圆形-右"
"Arrow Circle Up" :: "箭头-圆形-上"
"Arrow Down" :: "向下箭头"
"Arrow Up" :: "向上箭头"
"Arrow Left" :: "向左箭头"
"Arrow Right" :: "向右箭头"
"Arrows" :: "箭头样式"
"Arrows Alt" :: "放大箭头"
"Arrows H" :: "水平箭头"
"Arrows V" :: "垂直箭头"
"Asterisk" :: "星号"
"At" :: "艾特"
"Automobile" :: "汽车"
"Balance Scale" :: "天枰"
"Ban" :: "禁止"
"Bank" :: "银行"
"Bar Chart" :: "条形图"
"Bar Chart O" :: "条形图-空"
"Barcode" :: "条形码"
"Bars" :: "功能"
"Battery 0" :: "电量-0格"
"Battery 1" :: "电量-1格"
"Battery 2" :: "电量-2格"
"Battery 3" :: "电量-3格"
"Battery 4" :: "电量-4格"
"Battery Empty" :: "电量-空"
"Battery Full" :: "电量-满"
"Battery Half" :: "电量-1/2"
"Battery Quarter" :: "电量-1/4"
"Battery Three Quarters" :: "电量-3/4"
"Bed" :: "床"
"Beer" :: "啤酒"
"Bell" :: "铃声"
"Bell O" :: "铃声-空"
"Bell Slash" :: "静音"
"Bell Slash O" :: "静音-空"
"Bicycle" :: "自行车"
"Binoculars" :: "望远镜"
"Birthday Cake" :: "生日蛋糕"
"Bitcoin" :: "比特币"
"Bluetooth" :: "蓝牙-圆"
"Bluetooth B" :: "蓝牙"
"Bolt" :: "闪电"
"Bomb" :: "炸弹"
"Book" :: "书"
"Bookmark" :: "书签"
"Bookmark O" :: "书签-空"
"Briefcase" :: "公文包"
"Bug" :: "臭虫"
"Building" :: "建筑"
"Building O" :: "建筑-空"
"Bullhorn" :: "扩音器"
"Bullseye" :: "靶心"
"Bus" :: "公共汽车"
"Cab" :: "出租车"
"Calculator" :: "计算器"
"Calendar" :: "日历"
"Calendar Check O" :: "日历-对号"
"Calendar Minus O" :: "日历-减号"
"Calendar O" :: "日历-空"
"Calendar Plus O" :: "日历-加号"
"Calendar Times O" :: "日历-乘号"
"Camera" :: "照相机"
"Camera Retro" :: "老式相机"
"Car" :: "小汽车"
"Caret Down" :: "插入符-下"
"Caret Left" :: "插入符-左"
"Caret Right" :: "插入符-右"
"Caret Square O Down" :: "插入符-方形-下"
"Caret Square O Left" :: "插入符-方形-左"
"Caret Square O Right" :: "插入符-方形-右"
"Caret Square O Up" :: "插入符-方形-上"
"Caret Up" :: "插入符-上"
"Cart Arrow Down" :: "购物车-箭头-下"
"Cart Plus" :: "购物车-加号"
"CC" :: "支付"
"CC Amex" :: "支付-Amex"
"CC Diners Club" :: "支付-Diners Club"
"CC Discover" :: "支付-Discover"
"Cc Jcb" :: "支付-Jcb"
"Cc Mastercard" :: "支付-Mastercard"
"CC JCB" :: "支付-JCB"
"CC MasterCard" :: "支付-MasterCard"
"CC PayPal" :: "支付-PayPal"
"CC Stripe" :: "支付-Stripe"
"CC Visa" :: "支付-Visa"
"Cc Amex" :: "支付-Amex"
"Cc Diners Club" :: "支付-Diners Club"
"Cc Discover" :: "支付-Discover"
"Cc JCB" :: "支付-JCB"
"Cc MasterCard" :: "支付-MasterCard"
"Cc Paypal" :: "支付-Paypal"
"Cc Stripe" :: "支付-Stripe"
"Cc Visa" :: "支付-Visa"
"Certificate" :: "证书"
"Chain" :: "链接"
"Chain Broken" :: "链接-断开"
"Check" :: "对号"
"Check Circle" :: "对号-圆形"
"Check Circle O" :: "对号-圆圈"
"Check Square" :: "对号-方形"
"Check Square O" :: "对号-方形-空"
"Chevron Circle Down" :: "臂章-圆形-下"
"Chevron Circle Left" :: "臂章-圆形-左"
"Chevron Circle Right" :: "臂章-圆形-右"
"Chevron Circle Up" :: "臂章-圆形-上"
"Chevron Down" :: "臂章-下"
"Chevron Left" :: "臂章-左"
"Chevron Right" :: "臂章-右"
"Chevron Up" :: "臂章-上"
"Child" :: "儿童"
"Circle" :: "圆形"
"Circle O" :: "圆形-空"
"Circle O Notch" :: "圆形-空-缺口"
"Circle Thin" :: "圆形-空-细边"
"Clock O" :: "时钟-空"
"Clone" :: "复制"
"Cloud" :: "云"
"Cloud Download" :: "云下载"
"Cloud Upload" :: "云上传"
"CNY" :: "人民币"
"Code" :: "代码"
"Code Fork" :: "代码-分支"
"Coffee" :: "咖啡"
"Cog" :: "齿轮"
"Cogs" :: "齿轮组"
"Comment" :: "讨论"
"Comment O" :: "讨论-空"
"Commenting" :: "讨论中"
"Commenting O" :: "讨论中-空"
"Comments" :: "讨论组"
"Comments O" :: "讨论组-空"
"Compass" :: "指南针"
"Compress" :: "收缩"
"Copyright" :: "版权"
"Creative Commons" :: "知识共享"
"Credit Card" :: "信用卡"
"Credit Card Alt" :: "信用卡-反色"
"Crosshairs" :: "准星"
"Cube" :: "立方体"
"Cubes" :: "立方体组"
"Cutlery" :: "餐具"
"Dashboard" :: "仪表盘"
"Dedent" :: "取消缩进"
"Desktop" :: "桌面"
"Dollar" :: "美元"
"Dot Circle O" :: "点圆-空"
"Eject" :: "弹出"
"Ellipsis H" :: "省略-水平"
"Ellipsis V" :: "省略-垂直"
"Envelope" :: "信封"
"Envelope O" :: "信封-空"
"Envelope Square" :: "信封-方形"
"Eraser" :: "橡皮"
"EUR" :: "欧元"
"Euro" :: "欧元"
"Exchange" :: "交换"
"Exclamation" :: "感叹号"
"Exclamation Circle" :: "感叹号-圆形"
"Exclamation Triangle" :: "感叹号-三角形"
"External Link" :: "外部链接"
"External Link Square" :: "外部链接-方形"
"Eye" :: "眼睛"
"Eye Slash" :: "眼睛-不可见"
"Eyedropper" :: "滴管"
"Fast Backward" :: "快退"
"Fast Forward" :: "快进"
"Fax" :: "传真"
"Feed" :: "广播-RSS"
"Female" :: "女性"
"Fighter Jet" :: "战斗机"
"File Archive O" :: "存档文件-空"
"File Audio O" :: "音频文件-空"
"File Code O" :: "代码文件-空"
"File Excel O" :: "Excel文件-空"
"File Image O" :: "图像文件-空"
"File Movie O" :: "电影文件-空"
"File O" :: "文件-空"
"File PDF O" :: "PDF文件-空"
"File Photo O" :: "相片文件-空"
"File Picture O" :: "图画文件-空"
"File PowerPoint O" :: "PPT文件-空"
"File Sound O" :: "声音文件-空"
"File Text" :: "文本文件"
"File Text O" :: "文本文件-空"
"File Video O" :: "视频文件-空"
"File Word O" :: "Word文件-空"
"File Zip O" :: "压缩文件-空"
"Files O" :: "文件组-空"
"Film" :: "电影"
"Fire Extinguisher" :: "灭火器"
"Flag" :: "旗帜"
"Flag Checkered" :: "旗帜-方格"
"Flag O" :: "旗帜-空"
"Flash" :: "闪电"
"Flask" :: "长颈瓶"
"Floppy O" :: "软盘"
"Folder O" :: "文件夹-空"
"Folder Open" :: "文件夹-打开"
"Folder Open O" :: "文件夹-打开-空"
"Frown O" :: "难过-空"
"Futbol O" :: "足球-空"
"Gamepad" :: "游戏手柄"
"Gavel" :: "拍卖槌"
"GBP" :: "英镑"
"Gear" :: "齿轮"
"Gears" :: "齿轮组"
"Genderless" :: "无性"
"Gift" :: "礼物"
"Glass" :: "酒杯"
"Globe" :: "地球"
"Graduation Cap" :: "毕业帽"
"H Square" :: "H-方形"
"Hand Grab O" :: "手型-抓手-空"
"Hand Lizard O" :: "手型-蜥蜴-空"
"Hand O Down" :: "手型-空-下"
"Hand O Left" :: "手型-空-左"
"Hand O Right" :: "手型-空-右"
"Hand O Up" :: "手型-空-上"
"Hand Paper O" :: "手型-布-空"
"Hand Peace O" :: "手型-和平-空"
"Hand Pointer O" :: "手型-点击-空"
"Hand Rock O" :: "手型-石头-空"
"Hand Scissors O" :: "手型-剪刀-空"
"Hand Spock O" :: "手型-斯波克-空"
"Hand Stop O" :: "手型-停止-空"
"Hashtag" :: "井号"
"Hdd O" :: "硬盘-空"
"Header" :: "标头"
"Headphones" :: "耳机"
"Heart" :: "心形"
"Heart O" :: "心形-空"
"Heartbeat" :: "心跳"
"History" :: "历史"
"Hospital O" :: "医院-空"
"Hotel" :: "旅馆"
"Hourglass" :: "沙漏"
"Hourglass 1" :: "沙漏-1格"
"Hourglass 2" :: "沙漏-2格"
"Hourglass 3" :: "沙漏-3格"
"Hourglass End" :: "沙漏-结束"
"Hourglass Half" :: "沙漏-1/2"
"Hourglass O" :: "沙漏-空"
"Hourglass Start" :: "沙漏-开始"
"Inbox" :: "收件箱"
"Industry" :: "工业"
"Info" :: "信息"
"Info Circle" :: "信息-圆形"
"INR" :: "卢比"
"Institution" :: "大型机构"
"Intersex" :: "双性"
"JPY" :: "日元"
"Keyboard O" :: "键盘-空"
"KRW" :: "韩元"
"Language" :: "语言"
"Laptop" :: "笔记本电脑"
"Leaf" :: "叶子"
"Legal" :: "法律"
"Lemon O" :: "柠檬-空"
"Level Down" :: "降级"
"Level Up" :: "升级"
"Life Bouy" :: "救生圈"
"Life Buoy" :: "救生圈"
"Life Ring" :: "救生圈"
"Life Saver" :: "救生圈"
"Lightbulb O" :: "电灯泡-空"
"Line Chart" :: "线形图"
"List" :: "列表"
"List Alt" :: "列表"
"List Ol" :: "数字列表"
"List Ul" :: "项目列表"
"Location Arrow" :: "方向箭头"
"Long Arrow Down" :: "长箭头-下"
"Long Arrow Left" :: "长箭头-左"
"Long Arrow Right" :: "长箭头-右"
"Long Arrow Up" :: "长箭头-上"
"Magic" :: "魔术棒"
"Magnet" :: "磁铁"
"Mail Forward" :: "邮件-发送"
"Mail Reply" :: "邮件-回复"
"Mail Reply All" :: "邮件-回复全部"
"Male" :: "男性"
"Map" :: "地图"
"Map Marker" :: "地图标记"
"Map O" :: "地图-空"
"Map Pin" :: "地图-图钉"
"Map Signs" :: "地图-路标"
"Mars" :: "火星-男性"
"Mars Double" :: "男同-攻"
"Mars Stroke" :: "男同-受"
"Mars Stroke H" :: "男受-水平"
"Mars Stroke V" :: "男受-垂直"
"Medkit" :: "医药箱"
"Meh O" :: "无聊-空"
"Mercury" :: "水星"
"Microphone" :: "麦克风"
"Microphone Slash" :: "麦克风-静音"
"Minus" :: "减号"
"Minus Circle" :: "减号-圆形"
"Minus Square" :: "减号-方形"
"Minus Square O" :: "减号-方形-空"
"Mobile" :: "手机"
"Mobile Phone" :: "移动电话"
"Money" :: "货币"
"Moon O" :: "月亮-空"
"Mortar Board" :: "学士帽"
"Motorcycle" :: "摩托车"
"Mouse Pointer" :: "鼠标指针"
"Music" :: "音乐"
"Navicon" :: "隐式菜单"
"Neuter" :: "中性"
"Newspaper O" :: "报纸-空"
"Opera" :: "欧朋浏览器"
"Paint Brush" :: "画刷"
"Paper Plane" :: "纸飞机"
"Paper Plane O" :: "纸飞机-空"
"Paperclip" :: "曲别针"
"Pause" :: "暂停"
"Pause Circle" :: "暂停-圆形"
"Pause Circle O" :: "暂停-圆形-空"
"Paw" :: "爪印"
"Pencil" :: "铅笔"
"Pencil Square" :: "铅笔-方形"
"Pencil Square O" :: "铅笔-方形-空"
"Percent" :: "百分比"
"Phone" :: "电话"
"Phone Square" :: "电话-方形"
"Photo" :: "相片"
"Picture O" :: "图画-空"
"Pie Chart" :: "饼形图"
"Plane" :: "飞机"
"Play" :: "播放"
"Play Circle" :: "播放-圆形"
"Play Circle O" :: "播放-圆形-空"
"Plug" :: "插头"
"Plus Circle" :: "加号-圆形"
"Plus Square" :: "加号-方形"
"Plus Square O" :: "加号-方形-空"
"Power Off" :: "电源-开关"
"Puzzle Piece" :: "拼图"
"QR Code" :: "二维码"
"Question" :: "问号"
"Question Circle" :: "问号-圆形"
"Quote Left" :: "双引号-左"
"Quote Right" :: "双引号-右"
"Random" :: "随机"
"Recycle" :: "回收"
"Registered" :: "注册商标"
"Renren" :: "人人"
"Reorder" :: "重排"
"Reply" :: "回复"
"Reply All" :: "回复全部"
"Retweet" :: "转发"
"RMB" :: "人民币"
"Road" :: "公路"
"Rocket" :: "火箭"
"Rotate Left" :: "旋转-左"
"Rotate Right" :: "旋转-右"
"Rouble" :: "卢布"
"RUB" :: "卢布"
"RSS Square" :: "RSS-方形"
"Rupee" :: "卢比"
"Scissors" :: "剪刀"
"Search Minus" :: "查找-减号"
"Search Plus" :: "查找-加号"
"Send" :: "发送"
"Send O" :: "发送-空"
"Share Alt" :: "共享"
"Share Alt Square" :: "共享-方形"
"Share Square" :: "共享-方形"
"Share Square O" :: "共享-方形-空"
"Shield" :: "盾牌"
"Ship" :: "轮船"
"Shopping Bag" :: "购物袋"
"Shopping Basket" :: "购物篮"
"Shopping Cart" :: "购物车"
"Sign In" :: "登录"
"Sign Out" :: "退出"
"Log Out" :: "退出"
"Signal" :: "信号"
"Sitemap" :: "站点地图"
"Sliders" :: "调节器"
"Smile O" :: "笑脸-空"
"Soccer Ball O" :: "足球-空"
"Sort" :: "排序"
"Sort Alpha Asc" :: "字母升序"
"Sort Alpha Desc" :: "字母降序"
"Sort Amount Asc" :: "数量升序"
"Sort Amount Desc" :: "数量降序"
"Sort Asc" :: "升序"
"Sort Desc" :: "降序"
"Sort Down" :: "排序-下"
"Sort Numeric Asc" :: "数字升序"
"Sort Numeric Desc" :: "数字降序"
"Sort Up" :: "排序-上"
"Space Shuttle" :: "航天飞机"
"Spinner" :: "加载中"
"Spoon" :: "勺子"
"Square" :: "方形"
"Square O" :: "方形-空"
"Star Half" :: "星形-1/2"
"Star Half Empty" :: "星形-1/2-空"
"Star Half Full" :: "星形-1/2"
"Star Half O" :: "星形-1/2-空"
"Star O" :: "星形-空"
"Step Backward" :: "向后"
"Step Forward" :: "向前"
"Stethoscope" :: "听诊器"
"Sticky Note" :: "便签"
"Sticky Note O" :: "便签-空"
"Stop" :: "停止"
"Stop Circle" :: "停止-圆形"
"Stop Circle O" :: "停止-圆形-空"
"Street View" :: "街景"
"Strikethrough" :: "删除线"
"Subscript" :: "下标"
"Subway" :: "地铁"
"Suitcase" :: "手提箱"
"Sun O" :: "太阳-空"
"Superscript" :: "上标"
"Support" :: "支持"
"Tablet" :: "平板设备"
"Tachometer" :: "仪表盘"
"Tag" :: "标签"
"Tags" :: "标签组"
"Tasks" :: "任务"
"Taxi" :: "出租车"
"Television" :: "电视"
"Tencent Weibo" :: "腾讯微博"
"Terminal" :: "终端"
"Text Height" :: "文本高度"
"Text Width" :: "文本宽度"
"Th" :: "表格"
"Th Large" :: "表格-大"
"Th List" :: "表格-列表"
"Thumb Tack" :: ""
"Thumbs Down" :: "拇指-下"
"Thumbs O Down" :: "拇指-空-下"
"Thumbs O Up" :: "拇指-空-上"
"Thumbs Up" :: "拇指-上"
"Ticket" :: "票"
"Times" :: "乘号"
"Times Circle" :: "乘号-圆形"
"Times Circle O" :: "乘号-圆形-空"
"Tint" :: "颜色"
"Toggle Down" :: "切换-下"
"Toggle Left" :: "切换-左"
"Toggle Off" :: "开关-关闭"
"Toggle On" :: "开关-开启"
"Toggle Right" :: "切换-右"
"Toggle Up" :: "切换-上"
"Trademark" :: "商标"
"Train" :: "火车"
"Transgender" :: "变性"
"Transgender Alt" :: "变性-各种"
"Trash" :: "垃圾桶"
"Trash O" :: "垃圾桶-空"
"Trophy" :: "奖杯"
"Truck" :: "货车"
"TRY" :: "里拉"
"TTY" :: "电传打字机"
"Turkish Lira" :: "里拉"
"Umbrella" :: "雨伞"
"University" :: "大学"
"Unlink" :: "取消链接"
"Unlock Alt" :: "取消锁定"
"Unsorted" :: "取消排序"
"Upload" :: "上传"
"USD" :: "美元"
"User" :: "用户"
"User MD" :: "用户-医生"
"User Plus" :: "用户-加号"
"User Secret" :: "用户-匿名"
"User Times" :: "用户-乘号"
"Users" :: "用户组"
"Venus" :: "金星-女性"
"Venus Double" :: "女同-攻"
"Venus Mars" :: "女同-受"
"Video Camera" :: "摄像机"
"Volume Down" :: "音量-低"
"Volume Off" :: "音量-关"
"Volume Up" :: "音量-高"
"WeChat" :: "微信"
"Weibo" :: "新浪微博"
"Weixin" :: "微信"
"Wheelchair" :: "轮椅"
"Won" :: "韩元"
"Wrench" :: "扳手"
"Yen" :: "日元"

-------自定义形状-------
"Pie Chart" :: "饼形"
"Top Tab" :: "顶部标签"
"Left Tab" :: "左侧标签"
"Classic Tab" :: "传统标签"
"Triangle" :: "三角形"
"Right Triangle" :: "直角三角形"
"Drop" :: "水滴形"
"Star" :: "星形"
"Heart" :: "心形"
"Plus" :: "加号"
"Right Arrow" :: "向右箭头"
"Left Arrow" :: "向左箭头"
"Double Arrow" :: "双向箭头"
"Right Arrow Button" :: "向右箭头按钮"
"Left Arrow Button" :: "向左箭头按钮"
"Curly Bracket" :: "花括号"
"Speech Bubble" :: "对话气泡"
"Stacked Rectangle" :: "矩形组"
"Beveled Rectangle" :: "斜角矩形"
"Diamond" :: "菱形"
"File" :: "文件"
"Stacked File" :: "文件组"
"Bracket" :: "括弧"
"Semicircle" :: "半圆形"
"Trapezoid" :: "梯形"
"Hexagon" :: "六边形"
"Parallelogram" :: "平行四边形"
"Actor" :: "角色"
"Database" :: "数据库"

-------------------------------母版-------------------------------
"Add Master" :: "添加母版"
"New Master" :: "新建母版"

-------------------------------交互-------------------------------

"({0} Name)" :: "({0}名称)"
"New Interaction" :: "新建交互"
"Start adding new interactions\nby clicking the button above" :: "点击上方按钮开始添加新的交互"
"COMMON INTERACTIONS" :: "常用交互"
"Mouseover" :: "鼠标悬停"
"Focused" :: "获取焦点"
"Hint" :: "提示"
"Style" :: "样式"
" Style Effect" :: "交互样式"
"Set Visibility" :: "设置可见性"
"Set Next State" :: "设置为下一个状态"
"Set Previous State" :: "设置为上一个状态"
"Insert Text Link" :: "插入文本链接"
"Multiple Widgets" :: "多个元件"
"Sort Items" :: "排序列表项"
"Filter Items" :: "筛选列表项"
"Images" :: "图片"
"Hot Spots" :: "热区"
"Repeaters" :: "中继器"
"RadioButtons" :: "单选按钮"
"Checkboxes" :: "复选框"
"Radio Buttons and Checkboxes" :: "单选按钮与复选框"
" and " :: "与"
"Assign Radio Group:" :: "单选按钮组"
"Submit Button" :: "提交按钮"
"Read Only" :: "只读"
"Typing" :: "输入"
"Hint Text" :: "提示文本"
"Hide After" :: "隐藏提示"
"Max Length" :: "最大长度"
"Add Interaction" :: "添加交互"
"Add Style Effect" :: "添加交互样式"
"Add Interaction or Style Effect" :: "添加交互或交互样式"
":hint" :: ":提示"
"Style Overrides" :: "样式重设"
"More Style Properties" :: "更多样式选项"
"Less Style Properties" :: "收起更多选项"
"Click to combine and edit the different styles" :: "点此统一并编辑所选元件的交互样式"
----------设置----------
"Groups" :: "组合"
"Shape" :: "形状"
"Shapes and Images" :: "形状与图片"
"Tooltip" :: "工具提示"
"Selection Group" :: "选项组"
"Disabled" :: "禁用"
"Reference Page" :: "引用页面"
"Clear Reference Page" :: "清除引用"
"Trigger Mouse Interaction Styles" :: "触发内部元件鼠标交互样式"
"Isolate Radio Groups" :: "隔离列表项之间单选按钮的组"	
"Isolate Selection Groups" :: "隔离列表项之间选项的组"
----------情形----------
"Enable Case" :: "启用情形"
"Insert Action to "{0}"" :: "插入符合“{0}”条件的动作"
"Add Case" :: "添加情形"
"Add Target" :: "添加目标"
"LOGIC" :: "条件"
"+Logic" :: "＋添加条件"
"+ Logic" :: "＋添加条件"
"Insert Action" :: "插入动作"
"Add Action" :: "添加动作"
"This event has no actions." :: "  当前事件还没有添加任何动作"
"Would you like to" :: "您需要添加一个？"
"add one?" :: "点此添加"
"IF" :: "如果"
"ELSE" :: "否则"
"Case" :: "情形"
"Nothing selected" :: "未选择任何目标"
----------事件----------
"EVENTS" :: "事件"
"On{0}{1}" :: "{0}{1}时 "
"PageLoad" :: "页面载入"
"Click" :: "单击"
"DoubleClick" :: "双击"
"ContextMenu" :: "鼠标右击"
"MouseHover" :: "鼠标停放"
"MouseMove" :: "鼠标移动"
"LongClick" :: "鼠标长按"
"MouseEnter" :: "鼠标移入"
"MouseOut" :: "鼠标移出"
"MouseDown" :: "鼠标按下"
"MouseUp" :: "鼠标松开"
"KeyDown" :: "按键按下"
"KeyUp" :: "按键松开"
"DragDrop" :: "拖动结束"
"Drag" :: "拖动"
"DragStart" :: "拖动开始"
"SwipeUp" :: "向上拖动结束"
"SwipeDown" :: "向下拖动结束"
"SwipeLeft" :: "向左拖动结束"
"SwipeRight" :: "向右拖动结束"
"Resize" :: "尺寸改变"
"Rotate" :: "旋转"
"PanelStateChange" :: "状态改变"
"Scroll" :: "滚动"
"ScrollUp" :: "向上滚动"
"ScrollDown" :: "向下滚动"
"Load" :: "载入"
"Hide" :: "隐藏"
"Show" :: "显示"
"Move" :: "移动"
"Focus" :: "获取焦点"
"LostFocus" :: "失去焦点"
"TextChange" :: "文本改变"
"CheckedChange" :: "选中改变"
"SelectionChange" :: "选项改变"
"SelectedChange" :: "选中改变"
"Selected" :: "选中"
"Unselected" :: "取消选中"
"Bring to Front/Back" :: "置于顶层/底层"
"Set Opacity" :: "设置不透明"
"Page" :: "页面"
"Window" :: "窗口"
"AdaptiveViewChange" :: "自适应视图改变"
"ItemLoad" :: "每项加载"
"ItemResize" :: "列表项尺寸改变"
----------动作----------
"LINK ACTIONS" :: "链接动作"
"Open Link" :: "打开链接"
"Close Window" :: "关闭窗口"
"Open Link in Frame" :: "框架中打开链接"
"Scroll to Widget (Anchor Link)" :: "滚动到元件"
"WIDGET ACTIONS" :: "元件动作"
"Show/Hide" :: "显示/隐藏"
"Set Text" :: "设置文本"
"Set Image" :: "设置图片"
"Set Panel State" :: "设置面板状态"
"Set Selected/Checked" :: "设置选中"
"Set Selected List Option" :: "设置列表选中项"
"Enable/Disable" :: "启用/禁用"
"Set Size" :: "设置尺寸"
"Expand/Collapse Tree Node" :: "展开/收起树节点"
"REPEATER ACTIONS" :: "中继器动作"
"Add Sort" :: "添加排序"
"Remove Sort" :: "移除排序"
"Add Filter" :: "添加筛选"
"Remove Filter" :: "移除筛选"
"Set Current Page" :: "设置当前显示页面"
"Set Items per Page" :: "设置每页项目数量"
"Add Rows" :: "添加行"
"Mark Rows" :: "标记行"
"Unmark Rows" :: "取消标记"
"Update Rows" :: "更新行"
"Delete Rows" :: "删除行"
"OTHER ACTIONS" :: "其它动作"
"Set Adaptive View" :: "设置自适应视图"
"Set Variable Value" :: "设置变量值"
"Wait" :: "等待"
"Other" :: "其它"
"Fire Event" :: "触发事件"
"Raise Event" :: "引发事件"
"Open <a>{0}</a> in <a>{1}</a>" :: "打开 <a>{0}</a> 在 <a>{1}</a>"
"Open <a>{0}</a>" :: "打开 <a>{0}</a>"
"Close Current Window" :: "关闭当前窗口"
"Scroll to <a>{0}</a>" :: "滚动到 <a>{0}</a>"
"Show/Hide Widget" :: "显示/隐藏元件"
"Show <a>{0}</a>" :: "显示 <a>{0}</a>"
"Hide <a>{0}</a>" :: "隐藏 <a>{0}</a>"
"Toggle <a>{0}</a>" :: "切换显示/隐藏 <a>{0}</a>"
" equal to " :: "等于"
"equal to " :: "等于"
" bring to front" :: "置于顶层"
"Set <a>{0}</a>" :: "设置 <a>{0}</a>"
"{0} to {1}" :: "{0} 到 {1}"
"; {0} to {1}" :: "; {0} 到 {1}"
" to " :: " 到 "
"Set <a>Panel to State</a>" :: "设置动态面板状态"
"Enable/Disable <a>Widget</a>" :: "启用/禁用元件"
"Enable <a>{0}</a>" :: "启用 <a>{0}</a>"
"Disable <a>{0}</a>" :: "禁用 <a>{0}</a>"
"Set <a>Image</a>" :: "设置 <a>图片</a>"
"Move <a>{0}</a>" :: "移动 <a>{0}</a>"
"Rotate <a>{0}</a>" :: "旋转 <a>{0}</a>"
"Rotate <a>Widget</a>" :: "旋转<a>元件</a>"
"Set Size of <a>{0}</a>" :: "设置尺寸于 <a>{0}</a>"
"Set Size of <a>Widget</a>" :: "设置<a>元件</a>尺寸"
"Bring <a>Widget</a> to Front/Back" :: "将<a>元件</a>置于顶层/底层"
"Bring <a>{0}</a> to Front " :: "将 <a>{0}</a> 置于顶层 "
"Send <a>{0}</a> to Back" :: "将 <a>{0}</a> 置于底层"
"Set Opacity on <a>Widget</a>" :: "设置<a>元件</a>不透明度"
"Set Opacity <a>{0}</a>" :: "设置不透明度于 <a>{0}</a>"
"Set Focus on <a>{0}</a>" :: "设置焦点到 <a>{0}</a>"
"Expand/Collapse <a>Tree Node</a>" :: "展开/收起<a>树节点</a>"
"Expand <a>{0}</a>" :: "展开 <a>{0}</a>"
"Collapse <a>{0}</a>" :: "收起 <a>{0}</a>"
"Set to {0} View" :: "设置为 {0} 视图"
"Wait <a>{0}</a>" :: "等待 <a>{0}</a>"
"Add event" :: "添加事件"
--------交互样式--------
"STYLE EFFECTS" :: "交互样式"
"Style Effects" :: "交互样式"
"Style Effects..." :: "交互样式..."
":mouseover" :: ":鼠标悬停"
":mousedown" :: ":鼠标按下"
":selected" :: ":选中"
":disabled" :: ":禁用"
":focused" :: ":获取焦点"
"Disabled Properties" :: "禁用属性"
"Selected Properties" :: "选中属性"
"Hint Properties" :: "提示属性"
----------条件----------
"Condition Builder" :: "情形编辑"
"CONDITION NAME" :: "情形名称"
"SATISFY" :: "符合"
"Match All" :: "匹配以下全部条件"
"Match Any" :: "匹配以下任何条件"
"Just add a conditon name to allow manual selection of the case in prototype" :: "如果只添加一个情形的名称，则在原型中需要选择一个情形来执行相应的动作。"
"My Button" :: "按钮"
"CASE 1" :: "情形1"
"CASE 2" :: "情形2"
"Or" :: "或者"
"or" :: "或者"
" and " :: " 并且 "
" or " :: " 或者 "
"\n     and " :: "\n     并且 "
"\n     or " :: "\n     或者 "
"length of value of " :: "元件文字长度于 "
"Start adding logic to build a case that triggers automatically when the conditions are met" :: "开始为情形添加条件，构建在满足条件时自动触发的情形来执行相应的动作。"
"Add Logic" :: "添加条件"
"text" :: "文本"
"value of variable" :: "变量值"
"length of variable value" :: "变量值长度"
"text on widget" :: "元件文字"
"text on focused widget" :: "焦点元件文字"
"length of widget value" :: "元件文字长度"	
"selected option of" :: "被选项"
"is disabled of" :: "禁用状态"
"is selected of" :: "选中状态"
"state of panel" :: "面板状态"
"visibility of widget" :: "元件可见"
"key pressed" :: "按下的键"
"cursor" :: "指针"
"area of widget" :: "元件范围"
"adaptive view" :: "自适应视图"
"is less than" :: "<"
"is greater than" :: ">"
"is less than or equals" :: "<="
"is greater than or equals" :: ">="
"is" :: "是"
"is not" :: "不是"
"enters" :: "进入"
"leaves" :: "离开"
"is over" :: "接触"
"is not over" :: "未接触"
"Add Row" :: "添加行"
"Delete Row" :: "删除行"
"This" :: "当前"
"This Widget" :: "当前元件"
"selected" :: "选中"
"numeric" :: "数字"
"alpha" :: "字母"	
"alpha-numeric" :: "字母或数字"
"one of" :: "之一"
"Enter Options..." :: "自定义选项..."
"Enter the values (one per line):" :: "输入选项值（每行一个）"
"equals" :: "=="
"does not equal" :: "!="
"true" :: "真"
"false" :: "假"
"and" :: "并且"
"checkbox" :: "复选框"
"state" :: "状态"
"option" :: "选项"
"key value" :: "键值"
"option" :: "选项"
" equals " :: "=="
" does not equal " :: "!="
" is less than " :: " < "
" is greater than " :: " > "
" is less than or equals " :: " <= "
" is greater than or equals " :: " >= "
" contains " :: " 包含 "
" does not contain " :: " 不包含 "
" is alpha " :: " 是字母 "
" is alpha-numeric " :: " 是字母或数字 "
" is not alpha-numeric " :: " 不是字母或数字 "
" is numeric " :: " 是数字 "
" is not numeric " :: " 不是数字 "
"text on " :: "文字于 "
"value of " :: "值于 "
"length of value of variable " :: "变量值长度于 "
"text on focused widget " :: "焦点元件文字 "
"length of value of widget " :: "元件文字长度 "
"selected option of " :: " 被选项于 "
"is selected of " :: " 选中状态于 "
"state of " :: " 面板状态于 "
"visibility of " :: " 元件可见于 "
"is disabled of " :: " 禁用于 "
"area of " :: " 区域于 "
" enters " :: " 进入 "
" leaves " :: " 离开 "
" is over " :: " 接触 "
" is not over " :: " 未接触 "
" is one of " :: " 之一于 "
"current adaptive view" :: "当前自适应视图"
"if {0}" :: "如果 {0}"

----------设置----------
"Set {0} Image" :: "设置{0}图片"
"Link to" :: "链接到"
"Select page" :: "选择页面"
"MORE OPTIONS" :: "更多选项"
"Link to external URL" :: "链接到外部URL"
"Reload current page" :: "重新载入当前页面"
"Back to previous page" :: "返回上一页"
"Open In" :: "打开在"
"Current Window" :: "当前窗口"
"New Window/Tab" :: "新窗口/新标签"
"Popup Window" :: "弹出窗口"
"Parent Window" :: "父级窗口"
"Menubar" :: "菜单栏"
"Status" :: "状态栏"
"in" :: "在"
"Target" :: "目标"
"+ Add Target" :: "＋ 添加目标"
"Select Widget" :: "选择元件"
"Search widgets" :: "搜索元件"
"Parent Frame" :: "父级框架"
"Select Page" :: "选择页面"
"{0} in Parent Frame" :: "{0} 到 父级框架"
"Horizontally" :: "水平"
"Vertically" :: "垂直"
"Both" :: "不限"
"Animate" :: "动画"
"Swing" :: "摇摆"
"Ease In Cubic" :: "缓慢进入"	
"Ease In Out Cubic" :: "缓进缓出"	
"Ease Out Cubic" :: "缓慢退出"
"Bounce" :: "弹跳"
"Elastic" :: "弹性"
"ms" :: "毫秒"
"vertically only" :: "仅垂直方向"
"horizontally only" :: "仅水平方向"
"both vertically and horizontally" :: "不限方向"
"Hide Unnamed" :: "隐藏未命名元件"
"Toggle" :: "切换"
"Fade" :: "逐渐"
"Slide Down" :: "向下滑动"	
"Slide Left" :: "向左滑动"	
"Slide Right" :: "向右滑动"	
"Slide Up" :: "向上滑动"
"Flip Down" :: "向下翻转"	
"Flip Left" :: "向左翻转"	
"Flip Right" :: "向右翻转"	
"Flip Up" :: "向上翻转"
"Bring to Front" :: "置于顶层"
"Treat as Flyout" :: "弹出效果"	
"Treat as Lightbox" :: "灯箱效果"
"Background Color" :: "背景颜色"
"Push Widgets" :: "推动元件"
"Pull Widgets" :: "拉动元件"
"Direction" :: "方向"
"Below" :: "下方"
"From the Right" :: "右侧"
"To the Right" :: "右侧"
"Push/Pull Widgets" :: "推动和拉动元件"
"State" :: "State"
"Animate In" :: "进入动画"
"Animate Out" :: "退出动画"
"Show panel if hidden" :: "如果隐藏则显示"
"Stop Repeating" :: "停止循环"
"stop repeating" :: "停止循环"
"Previous" :: "上一项"
"Next" :: "下一项"
"Value" :: "值"
"value" :: "值"
"Last" :: "末尾"
"Previous2" :: "Previous"
"Next2" :: "Next"
"Value2" :: "Value"
"Last2" :: "Last"
"Name or State #:" :: "名称或序号:"
"Repeat every " :: "循环间隔"
"repeat every {0} ms " :: "循环间隔{0}毫秒"
"show if hidden " :: "如果隐藏则显示 "
"push/pull widgets {0} " :: "推动和拉动元件 {0}"
"below" :: "下方"
"right" :: "右侧"
"{0} {1}ms " :: " {0}{1}毫秒"
"Wrap from first to last" :: "向前循环"	
"Wrap from last to first" :: "向后循环"
"Delay first state change by {0} ms" :: "首个状态延时{0}毫秒后切换"
"in " :: "进入 "
"out " :: "退出 "
"delay first change " :: "首次改变延时"
"Focused Widget" :: "焦点元件"
"Set To" :: "设置为"
"rich text" :: "富文本"
"Edit text..." :: "编辑文本"
"Enter Text" :: "输入文本"
"Edit Value" :: "编辑值"
"Variable" :: "变量"
"Add new..." :: "新建..."
"Enter and format text below. To insert variables or expressions, surround the variable name or expression with \"[[\" and \"]]\". For example, \"[[MyVar]]\" or \"The sum is [[VarA + VarB]]\". The current page name can also be inserted using [[PageName]]." :: "在下方输入文本并设置样式, 变量名称或表达式要写在 \"[[ ]]\" 中。例如：\n▪ 插入变量[[MyVar]]，获取变量\"MyVar\"的当前值；\n▪ 插入表达式[[VarA + VarB]]，获取\"VarA + VarB\"的和；\n▪ 插入系统变量[[PageName]]，获取当前页面名称。"
"Insert Variable or Function..." :: "插入变量或函数..."
"Local Variables" :: "局部变量"
"Create local variables to insert widget values above. Variables names must be alphanumeric and contain no spaces." :: "在下方创建用于插入元件值的局部变量，局部变量名称必须是字母数字, 不允许包含空格。"
"Add Local Variable" :: "添加局部变量"
"widget" :: "元件"
"Repeater / Dataset" :: "中继器/数据集"
"Widget" :: "元件"
"Window" :: "窗口"
"Page" :: "页面"
"Cursor" :: "鼠标指针"
"Number" :: "数字"
"Math" :: "数学"
"String" :: "字符串"
"Date" :: "日期"
"Boolean" :: "布尔"
"image" :: "图片" 
"Enter text below. To insert variables or expressions, surround the variable name or expression with \"[[\" and \"]]\". For example, \"[[OnLoadVariable]]\" or \"The sum is [[VarA + VarB]]\". The current page name can also be inserted using [[PageName]]." :: "在下方输入文本, 变量名称或表达式要写在 \"[[ ]]\" 中。例如：\n▪ 插入变量[[MyVar]]，获取变量\"MyVar\"的当前值；\n▪ 插入表达式[[VarA + VarB]]，获取\"VarA + VarB\"的和；\n▪ 插入系统变量[[PageName]]，获取当前页面名称。"
"MouseOver" :: "鼠标悬停"
"Set" :: "设置"
"To" :: "到达"
"toggle" :: "切换"
"Option" :: "选项"
"Enable" :: "启用"
"Disable" :: "禁用"
"drag" :: "跟随拖动"
"drag X" :: "跟随水平拖动"
"drag Y" :: "跟随垂直拖动"
"with This" :: "跟随当前元件"
"to x,y before drag" :: "回到拖动前位置"
"With Drag" :: "跟随拖动"
"With Drag x" :: "跟随水平拖动"
"With Drag y" :: "跟随垂直拖动"
"To x,y Before Drag" :: "回到拖动前位置"
"With This" :: "跟随当前元件"
"By" :: "经过"
"Trajectory" :: "轨道"
"Straight" :: "直线"
"Arc clockwise" :: "顺时针弧线"
"Arc counterclockwise" :: "逆时针弧线"
"to ({0},{1})" :: "到达 ({0},{1})"
"by ({0},{1})" :: "经过 ({0},{1})"
"Bounds" :: "边界"
"Add boundary" :: "添加界限"
"top" :: "顶部"
"left" :: "左侧"
"bottom" :: "底部"
"Clockwise" :: "顺时针"
"clockwise" :: "顺时针"
" clockwise" :: " 顺时针"
"Counterclockwise" :: "逆时针"
" counterclockwise" :: " 逆时针"
"Offset + Anchor" :: "偏移 ＋ 锚点"
"Size and Anchor" :: "尺寸 ＋ 锚点"
"anchor " :: " 锚点"
"anchor" :: " 锚点"
" center" :: " 中心"
" left" :: " 左侧"
" right" :: " 右侧"
" top" :: " 顶部"
" bottom" :: " 底部"
" top left" :: " 左上"
" top right" :: " 右上"
" bottom left" :: " 左下"
" bottom right" :: " 右下"
" counterclockwise" :: " 逆时针"
"counterclockwise " :: "逆时针 "
"offset by ({0},{1})" :: "偏移经过 ({0},{1})"
"to {0}w x {1}h" :: "为 {0}宽 x {1}高"
"to {0}°" :: "到达 {0}°"
"by {0}°" :: "经过 {0}°"
"to {0} deg" :: "到达 {0}°"
"by {0} deg" :: "经过 {0}°"
"to "{0}"" :: "为 {0}"
"To Front" :: "顶层"
"To Back" :: "底层"
" to Front" :: " 到 顶层"
" to Back" :: " 到 底层"
"Opacity" :: "不透明性"
"Select text in text field or text area" :: "获取焦点时选中元件上的文本"
"Collapse" :: "收起"
"Tree Node" :: "节点"
" select text" :: " 选中文本"
"Sort As" :: "排序类型"
"Order" :: "排序"
"Ascending" :: "升序"
"Descending" :: "降序"
"asc" :: "升序"
"dsec" :: "降序"
"Text2" :: "Text"
"Number2" :: "Number"
"Default2" :: "默认"
"{0} as {1} {2}" :: "{0} 按照 {1} {2}"
" from {0}" :: " 从 {0}"
"Name of Sort" :: "排序名称"
"FILTER" :: "筛选"
"All" :: "全部"
"Rule" :: "规则"
"ex. [[Item.State == 'CA']]" :: "格式：[[Item.UserName == '小楼']]"	
"Remove other filters" :: "移除其它筛选"
", remove other filters" :: " 并移除其它筛选"
"page" :: "页"
"add" :: "添加"
"Page #" :: "页码"
"Items" :: "列表项"
"Show All Items" :: "显示全部列表项"
"{0} Set to " :: "{0} 设置为 "
"Unlimited" :: "未限制"
"row" :: "行"
"Add Rows to Repeater" :: "添加行到中继器"	
"Marked" :: "已标记"
"Columns + Value" :: "列 ＋ 值"
"Select Column" :: "选择列"
"all rows" :: "中全部的行"
"marked rows" :: "中已标记的行"
"{0} where \"{1}\"" :: "{0} 当符合规则{1}时"
"set" :: "设置"
"to" :: "为"
"to " :: "为 "
"{0} to \"{1}\"" :: "{0} 为 \"{1}\""
"{0} {1}ms" :: "{0} {1}毫秒"
" {0} {1}ms" :: " {0} {1}毫秒"
"{0} {1}ms " :: "{0} {1}毫秒 "
"{0} {1} {2}ms" :: "{0} {1} {2}毫秒"
"{0}{1} {2}ms" :: "{0}{1} {2}毫秒"
"{0}{1} {2} {3}ms" :: "{0}{1} {2} {3}毫秒"
"{0} {1}{2}ms" :: "{0} {1}{2}毫秒"
"{0} {1}{2} {3}ms" :: "{0} {1}{2} {3}毫秒"
"{0}{1}{2} {3}ms" :: "{0}{1}{2} {3}毫秒"
"repeat every {0} 毫秒 " :: "重复间隔{0}毫秒 "
" push/pull" :: " 推动和拉动"
" push" :: " 推动"
" pull" :: " 拉动"
" widgets " :: " 元件 "
"Toggle Visibility" :: "切换可见性"
"Animate Show" :: "显示动画"
"Animate Hide" :: "隐藏动画"
" wrap" :: " 循环"
"Choose Variable" :: "选择变量"
"Add Variable" :: "＋ 添加变量"
"Wait For" :: "等待"
"Action Description" :: "动作描述"
"Adaptive View" :: "自适应视图"
"Events" :: "事件"
"Add events" :: "添加事件"
"Event" :: "事件"
"Raised events on a master appear in the interactions of each instance of the master. Use raised events when interactions on a master vary from instance to instance or when interactions on a master affect widgets not in the master." :: "母版自定义引发事件可与母版中元件的交互事件绑定，并在该母版所影响的页面中设置自定义引发事件的动作。"
"Raised event names must be alphanumeric and contain no spaces. For example, OnMyButtonClick." :: "引发的事件名称必须是字母与数字，并且不能包含空格，例如：OnMyButtonClick。"
"Check the events to raise in this action" :: "请在下方选择当前动作引发的事件。"
"Select the panels to set the state" :: "选择面板设置状态"
"Select the widgets you want to fire events on" :: "选择需要触发事件的元件"
"Select the widgets to rotate" :: "选择需要触发事件的元件"
"Select the image widgets to set the image" :: "选择需要设置的图片元件"
"Select the widgets to send to back or bring to front" :: "选择需要置于顶层或底层的元件"
"Select the widgets to resize" :: "选择需要设置尺寸的元件"
"Select the widgets to hide/show" :: "选择需要显示或隐藏的元件"
"Select the widgets to move" :: "选择需要移动的元件"
"Select widget to focus" :: "选择需要获取焦点的元件"
"Select tree nodes to expand/collapse" :: "选择需要展开或收起的树节点"
"Select the repeaters to add sorting" :: "选择需要添加排序的中继器"
"Select the repeaters to add filters" :: "选择需要添加筛选的中继器"
"Select the repeaters to refresh" :: "选择需要刷新的中继器"
"Select the repeaters to remove filters" :: "选择需要移除筛选的中继器"
"Select the repeaters to remove sorting" :: "选择需要移除排序的中继器"
"Select the repeaters to set items per page" :: "选择需要设置每页项数量的中继器"
"Select the repeaters to set current page" :: "选择需要设置当前显示页面的中继器"
"Select the repeaters to add rows" :: "选择需要添加行的中继器"
"Select the repeaters to update their rows." :: "选择需要更新行的中继器"
"Select the repeaters to delete their items from." :: "选择需要删除行的中继器"
"Select the repeaters to mark rows" :: "选择需要标记行的中继器"
"Select the repeaters to Unmark rows" :: "选择需要标记行的中继器"
"Select widgets to enable/disable" :: "选择需要启用或禁用的元件"

-------------------------------样式-------------------------------
----------母版----------
"OVERRIDES" :: "重写"
"Master Views" :: "母版视图"
"MASTER VIEWS" :: "母版视图"
"MASTER VIEW" :: "母版视图"
"Edit Master Views" :: "编辑母版视图"
"Choose Image" :: "选择图片"
"Add Master Views" :: "添加母版视图"
"CANVAS" :: "画布"
"The canvas color is only applied while editing this master." :: "画布颜色仅应用于当前母版的编辑。"
----------页面----------
"PAGE DIMENSIONS" :: "页面尺寸"
"Fit to Content" :: "自适应内容"
"Custom Device" :: "自定义设备"
"APPLE" :: "苹果"
"ANDROID" :: "安卓"
"Android Tablet" :: "安卓平板电脑"
"ADAPTIVE VIEW" :: "自适应视图"
"Add Adaptive Views" :: "添加自适应视图"
"Edit Adaptive Views" :: "编辑自适应视图"
"Affect All Views" :: "影响所有视图"
"Remove Views" :: "删除视图"
"Create New Adaptive View Set" :: "新建自适应视图设置"
"Manage Page Styles" :: "管理页面样式"
"PAGE ALIGN" :: "页面排列"
"FILL" :: "填充"
----------连线----------
"Reflow" :: "重置连线"
"Sharp Turns" :: "直角折线"
"Rounded Turns" :: "圆角折线"
"Curve" :: "曲线"
----------元件----------
"LOCATION AND SIZE" :: "位置和尺寸"
"Rotation" :: "旋转"
"Fit to Text Width" :: "自动适合文本宽度"
"Fit to Text Height" :: "自动适合文本高度"
"Widget Style" :: "元件样式"
"Color Adjust" :: "调整颜色"
"Update" :: "更新"
"Create" :: "创建"
"OPACITY" :: "不透明性"
"TYPOGRAPHY" :: "排版"
"auto" :: "自动"
"Line2" :: "行间距"
"Character" :: "字间距"
"Fit to Image" :: "恢复图像尺寸"
"Preserve Corners" :: "固定边角范围"
"Unite" :: "合并"
"Subtract" :: "去除"
"Intersect" :: "相交"
"Exclude" :: "排除"
"Additional text options" :: "附加文本选项"
"Baseline" :: "基线"
"Letter Case" :: "字母"
"Repeat Background Image" :: "重复背景图片"
"BORDER" :: "线段"
"Pattern" :: "类型"
"Visibility" :: "可见性"
"SHADOW" :: "阴影"
"Outer" :: "外部"
"Inner" :: "内部"
"CORNER" :: "圆角"
"Radius" :: "半径"
"PADDING" :: "边距"
"DYNAMIC PANEL" :: "动态面板"
"No Scroll" :: "禁止滚动"
"Scroll as Needed" :: "按需滚动"
"Scroll Vertical" :: "垂直滚动"
"Scroll Horizontal" :: "水平滚动"
"100% Wide (browser only)" :: "100%宽度（仅浏览器中有效）"
"Pin to Browser" :: "固定到浏览器"
"INLINE FRAME" :: "内联框架"
"Add Frame Target" :: "添加框架目标"
"Hide Borders" :: "隐藏边框"
"Always Scroll" :: "始终滚动"
"Never Scroll" :: "从不滚动"
"No Preview" :: "无预览图"
"Video" :: "视频"
"Custom Preview" :: "自定义预览图"
"Fit to Content in HTML" :: "适应HTML内容"
"DATA" :: "数据"
"Add Column" :: "添加列"
"LAYOUT" :: "布局"
"Wrap (Grid)" :: "网格排布"
"Items per column" :: "每列项数量"
"Items per row" :: "每行项数量"	
"Alternate Colors" :: "交替颜色"
"ITEM BACK" :: "背景"
"Alternate" :: "交替"
"PAGINATION" :: "分页"
"Multiple pages" :: "多页显示"	
"Items per page" :: "每页项数量"
"Starting page" :: "起始页"
"SPACING" :: "间距"
"Row" :: "行"
"Column" :: "列"
"BUTTON" :: "按钮"
"Size" :: "尺寸"
"MENU PADDING" :: "菜单填充"
"TREE" :: "树"
"Edit Tree Props" :: "编辑属性"
"Tree Properties" :: "树属性"
"Import an image file for the icon. Images larger than 16 x 16 px will be scaled down." :: "导入一个图标，建议图标大小为16*16。"
"Apply to:" :: "适用于："
"This node only" :: "当前节点"
"This node and siblings" :: "当前节点和同级节点"
"This node, siblings, and all child nodes" :: "当前节点、同级节点和全部子节点"
"Use Edit Tree Properties in the context menu to hide or show icons." :: "在右键菜单中编辑树属性，可以显示隐藏图标。"
"Edit Icon" :: "编辑图标"
"Tree Node Icons" :: "编辑图标"
"Show Expand/Collapse Icon" :: "显示展开/折叠的图标"
"Plus/Minus" :: "+/-"
"Images larger than 9 x 9 px will be scaled down."  ::  "图片超过9 x 9像素将自动缩小。"
"Show Icon (use context menu on tree nodes to import icons)" :: "显示图标（使用在树节点右键菜单中编辑导入的图标）"
"SNAPSHOT" :: "快照"
"Add Reference Page" :: "添加引用页面"
"Clear Reference" :: "清除引用"
"Master" :: "母版"
"Scale to Fit" :: "适应比例"
"Padding" :: "填充"
"Applied Actions" :: "执行动作"

-------------------------------说明-------------------------------
"Assign Widget +" :: "指定元件 +"
"Unassign Widget" :: "取消指定元件"
"Include Text and Interactions" :: "包含文字与交互"
"Include Widget Text" :: "包含元件文字"
"Include Interactions" :: "包含交互内容"
"Include Both" :: "包含以上两项"
"Widget Interactions" :: "元件交互"
"Exclude Widget Text" :: "不包含元件文字"
"Exclude Interactions" :: "不包含交互内容"
"Exclude Both" :: "不包含以上两项"
"Include Both" :: "包含以上两项"
"Format" :: "格式"

-----------------------------右键菜单-----------------------------
--------快捷功能--------
"Show Toolbar" :: "显示工具栏"
"Show Text" :: "显示文本"
"Customize Toolbar..." :: "自定义工具栏..."
"Show Style Toolbar" :: "显示样式工具栏"
----------页面----------
"Paste as &Plain Text" :: "粘贴为纯文本(&P)"
"&Select All" :: "全选(&S)"
"&Add" :: "添加(&A)"
"&Move" :: "移动(&M)"
"&Folder" :: "文件夹(&F)"
"Page &After" :: "下方添加页面(&A)"
"Page &Before" :: "上方添加页面(&B)"
"&Child Page" :: "子页面(&C)"
"Move &Up" :: "上移(&U)"
"Move &Down" :: "下移(&D)"
"&Indent" :: "降级(&I)"	
"&Outdent" :: "升级(&O)"
"&Cut" :: "剪切(&C)"
"&Rename" :: "重命名(&R)"
"Dupli&cate" :: "重复(&C)"
"&Page" :: "页面(&P)"
"&Branch" :: "分支(&B)"	
"Diagram &Type" :: "图表类型(&T)"
"&Flow" :: "流程图(&F)"
"Generate Flow Diagram" :: "生成流程图"
"Select the diagram type:" :: "选择图表类型: "
"Diagram Type" :: "图表类型"
"Standard" :: "向下"
"Right Hanging" :: "向右"
----------画布----------
"Paste Special" :: "粘贴选项"
"Paste Style" :: "粘贴样式"
"Paste as &Image" :: "粘贴为图片(&I)"
"Paste as &Table" :: "粘贴为表格(&T)"
"Paste Widget &Notes" :: "粘贴元件说明(&N)"
"Paste including &Locked Widgets" :: "粘贴包含锁定的元件(&L)"
"Select All &Above" :: "选择上方全部(&A)"
"Select All &Below" :: "选择下方全部(&B)"
"Select and Manage Tabs" :: "选择与管理标签"
"Close Tab" :: "关闭标签"
"Close All Tabs" :: "关闭全部标签"
"Close Other Tabs" :: "关闭其它标签"
"Return to (0, 0)" :: "回到原点"
----------母版----------
"Master &After" :: "下方添加母版(&A)"
"Master &Before" :: "上方添加母版(&B)"
"&Child Master" :: "子母版(&C)"
"&Master" :: "母版(&M)"	
"Drop &Behavior" :: "拖放行为(&B)"
"&Place Anywhere" :: "任意位置(&P)"
"&Lock to Master Location" :: "固定位置(&L)"
"&Break Away" :: "脱离母版(&B)"	
"Lock to Master Location" :: "锁定到母版中的位置"
"Break Away" :: "脱离母版"	
"Add Master To Pages" :: "添加母版到页面中"
"&Add to Pages..." :: "添加到页面中...(&A)"
"Add {0} to:" :: "添加[{0}]到下列页面："
"Position" :: "位置"
"Lock to location in master" :: "锁定为母版中的位置"
"Specify location" :: "指定新的位置"
"Left:" :: "左侧："
"Top:" :: "顶部："
"Right:" :: "右侧："
"Send to back" :: "置于底层"
"Only add if the page does not already contain the master" :: "页面中不包含此母版时才能添加。"
"Note: This action cannot be undone." :: "说明：此操作无法撤销。"
"&Remove from Pages..." :: "从页面中移除...(&R)"
"Remove Master from Pages" :: "从页面中移除母版"
"Remove {0} from:" :: "从下列页面中移除[{0}]："
"&Usage Report..." :: "使用情况...(&U)"
"Create Master" :: "创建母版"
"Note that interactions that affect these widgets\nwill need to be updated." :: "注意：与这些元件关联的交互将需要更新。"
"New Master Name" :: "新建母版名称："
"Don't show" :: "不再显示"
"Continue" :: "继续"
----------样式----------
"Flip Horizontal" :: "水平翻转"	
"Flip Vertical" :: "垂直翻转"
"Combine" :: "结合"
"Break Apart" :: "分开"
----------交互----------
"Paste as Plain Text" :: "粘贴为纯文本"
"Select All" :: "全选"
"Edit Row" :: "编辑行"
"Move Case &Up" :: "上移情形"
"Move Case &Down" :: "下移情形"
"Move Action &Up" :: "上移动作"
"Move Action &Down" :: "下移动作"
"&Add Case" :: "添加情形"
"&Delete All Cases" :: "删除全部情形"
"&Clear Condition" :: "清除条件"
"Toggle IF/ELSE IF" :: "切换为[如果]或[否则]"
----------说明----------
"&Edit Number" :: "编辑序号"
"Move Note &Up" :: "向上移动"
"Move Note &Down" :: "向下移动"
----------元件----------
"Set Hidden" :: "设为隐藏"
"Set Visible" :: "设为可见"
"&Order" :: "顺序(&O)"
"Edit Text" :: "编辑文本"
"Fill with Lorem Ipsum" :: "填充乱数假文"
"Selection Group..." :: "选项组..."
"Select an existing group or enter a\nnew group name." :: "选择已有的组名称或者输入新的组名称。"
"Group Name" :: "组名称"
"Reference Page..." :: "引用页面"
"Tooltip..." :: "工具提示..."
"Convert to Image" :: "转换为图片"
"Import Image" :: "导入图片"
"Select Shape..." :: "选择形状"
"Transform Shape" :: "变换形状"
"Curve All Points" :: "曲线连接各点"
"Sharpen All Points" :: "折线连接各点"
"Transform Image" :: "变换图片"
"Import Image..." :: "导入图片"
"Slice Image" :: "切割图片"
"Slicing Image" :: "切割图片"
"Crop Image" :: "裁剪图片"
"Cropping Image" :: "裁剪图片"
"Optimize Image" :: "优化图片"
"Convert SVG to Shapes" :: "转换SVG图片为形状"
"Assign Selection Group..." :: "指定选项组..."
"Edit List Items" :: "编辑列表项"
"Assign Submit Button..." :: "指定提交按钮"
"Assign Submit Button" :: "指定提交按钮"
"Check the button that is clicked when the Enter key is pressed." :: "按下回车键时将触发该按钮鼠标单击事件。"
"Align Radio Button Left" :: "单选按钮居左"
"Align Radio Button Right" :: "单选按钮居右"
"Assign Radio Group" :: "指定单选按钮的组"
"Align Checkbox Left" :: "复选框居左"
"Align Checkbox Right" :: "复选框居右"
"Input Type" :: "输入类型"
"Phone Number" :: "电话"
"Url" :: "URL"
"Month" :: "月份"
"Time" :: "时间"
"Edit Max Length" :: "编辑最大长度"
"Text Field Max Length" :: "文本字段最大长度"
"Frame Target" :: "框架目标"
"Toggle Border" :: "切换边框"
"Scrollbars" :: "滚动条"
"Show Scrollbars as Needed" :: "自动显示滚动条"
"Always Show Scrollbars" :: "始终显示滚动条"
"Never Show Scrollbars" :: "从不显示滚动条"
"Preview Image (editor only)" :: "预览图片（仅限画布中显示）"
"Reference Page or Master..." :: "引用页面或母版..."
"Pin to Browser..." :: "固定到浏览器..."
"Pinning a panel to the browser keeps it in the same position regardless of scrolling.\nThis effect is in the browser only." :: "固定动态面板在浏览器中的位置保持不变。\n（仅浏览器中有效）"
"Pin to browser window" :: "固定到浏览器窗口"
"Horizontal Pin" :: "水平固定"
"Margin:" :: "边距："
"Vertical Pin" :: "垂直固定"
"Keep in front (browser only)" :: "始终保持顶层（仅浏览器中有效）"
"Fire Mouse Interaction Styles" :: "触发内部元件鼠标交互样式"
"Fire Mouse Style Effects" :: "触发内部元件鼠标交互样式"
"Break Away First State" :: "从首个状态脱离"
"Show Horizontal Scrollbar as Needed" :: "自动显示水平滚动条"
"Show Vertical Scrollbar as Needed" :: "自动显示垂直滚动条"
"&Edit Tree Properties" :: "编辑树属性(&E)"
"&Delete Node" :: "删除节点(&D)"
"Edit &Icon" :: "编辑图标(&I)"	
"Add &Child" :: "添加子节点(&C)"
"Add Sibling &Before" :: "上方添加节点(&B)"
"Add Sibling &After" :: "下方添加节点(&A)"
"Insert Row" :: "插入行"
"Insert Column" :: "插入列"
"Add Row Above" :: "上方添加行"	
"Add Row Below" :: "下方添加行"
"Move Row Up" :: "上移行"
"Move Row Down" :: "下移行"
"Add Column Left" :: "左侧添加列"	
"Add Column Right" :: "右侧添加列"
"Delete Column" :: "删除列"
"Move Column Left" :: "左移列"
"Move Column Right" :: "右移列"
"Menu Padding" :: "菜单项填充"
"&Edit Menu Padding" :: "编辑菜单填充(&E)"
"Add Menu Item &After" :: "后方添加菜单项(&A)"	
"Add Menu Item &Before" :: "前方添加菜单项(&B)"
"&Delete Menu Item" :: "删除菜单项(&D)"
"Add &Submenu" :: "添加子菜单(&S)"
"This menu only" :: "仅当前菜单"
"This menu and all submenus" :: "当前菜单和全部子菜单"
"De&lete Submenu" :: "删除子菜单(&L)"
"Select &Row" :: "选择行(&R)"
"Insert Row &Above" :: "上方插入行(&A)"	
"Insert Row &Below" :: "下方插入行(&B)"
"Insert {0} Rows &Above" :: "上方插入{0}行(&A)"	
"Insert {0} Rows &Below" :: "下方插入{0}行(&B)"
"Select &Column" :: "选择列(&C)"
"Insert Column &Left" :: "左侧插入列(&L)"	
"Insert Column &Right" :: "右侧插入列(&R)"
"Insert {0} Columns &Left" :: "左侧插入 {0} 列(&L)"	
"Insert {0} Columns &Right" :: "右侧插入 {0} 列(&R)"
"Delete Columns" :: "删除列"
-----------------------------元件编辑-----------------------------
"Add State" :: "添加状态"
"Duplicate State" :: "重复状态"
"Delete State" :: "删除状态"
"List Item" :: "列表项"
"Isolate" :: "隔离"
"Link Properties" :: "链接属性"
"Open in" :: "链接目标"
"Link to a page in this design" :: "链接一个当前原型中的页面"
"Link to an external url or file" :: "链接一个外部的URL或文件"
"Hyperlink" :: "超链接"
"Repeater in a Repeater" :: "中继器嵌套警告"
"A repeater cannot contain another repeater." :: "中继器禁止包含其它中继器。"
"POINT POSITION" :: "点位"
"Open Path" :: "开放路径"
"Close Path" :: "闭合路径"
"Sharp" :: "折线"
"Curved" :: "曲线"
"Reflow Connector" :: "重置连线"
"Connector Mode" :: "连接模式"
"Edit Connector Points" :: "编辑连接点"
"Edit Droplist" :: "编辑下拉列表"
"Add and organize the list options.\nCheck an option to set it to be selected by default." :: "添加和组织列表选项。\n勾选一项作为默认项，未勾选则默认为第一项。"
"Edit Many" :: "编辑多项"
"Edit List Box" :: "编辑列表框"
"Allow multiple items to be selected by default" :: "允许选中多个选项"
---------------------------自定义元件库---------------------------
"Double-click a page in the Widget Library Pages pane to open it." :: "在元件库页面功能区中双击一个页面打开它。"
"Print..." :: "打印..."	
"&Print All Widgets..." :: "打印所有元件..."
"Export to Image..." :: "导出到图像..."
"&Export All Widgets to Image..." :: "导出所有元件到图像..."
"New Widget" :: "新建元件"
"Add Widget" :: "添加元件"
"Widget &After" :: "下方添加元件(&A)"	
"Widget &Before" :: "上方添加元件(&B)"	
"&Child Widget" :: "子元件(&C)"
"TOOLTIP (in the Libraries pane)" :: "提示信息(显示在元件功能区)"
"ICON" :: "图标"
"Use the thumbnail" :: "使用缩略图"
"Custom icon" :: "自定义图标"
"56x56 (hi-res for Mac retina displays)" :: "56x56 （Mac视网膜显示器专用高清图标）"	

----------------------------交互编辑器----------------------------
"Interaction Editor" :: "交互编辑器"
"ADD EVENT" :: "添加事件"
"ADD ACTION" :: "添加动作"
"Configure Actions" :: "设置动作"
"Organize Interactions" :: "组织动作"
"Select event to continue building interactions" :: "选择交互事件开始创建交互。"
