#__________________________________________________________
#
# PassMark Software
# BurnInTest v9.0
# Error Classifications
#__________________________________________________________
#
# Configuring Error Classifications
#
# Each of the standard errors detected by BurnInTest can configured 
# to include a customer specific string and error classification. 
# The file BITErrorClassification.txt (this file that stored in the 
# software directory) contains the error text and classification used 
# by BurnInTest. 
#
# The file is formatted as a Comma Separated File with four fields:
#
# 1. Error number – this must not be changed by the customer; 
# 2. Error description text – this may be changed. This must be a 
#    sting enclosed by quotes; 
# 3. Error classification – this may be changed. This must be one 
#    of the following text values (not in quotes):  
#      CRITICAL, SERIOUS, WARNING, INFORMATION or NONE
#
#    All errors may be configured to be logged but not included in the 
#    error count using INFORMATION, as they may be considered 
#    ‘below the radar’.
#
#    All errors may be configured to be ignored (not reported as errors)
#    using NONE, as they may be considered ‘below the radar’.
#
# 4. Customer comment – this is optional and may be changed – it is 
#    ignored by BurnInTest. 
#
#
# Notes:
#   (i) BurnInTest must be restarted after making changes to this file.
#  (ii) You need to run BurnInTest with sufficient privileges to save 
#       this file in the BurnInTest directory.
# (iii) A comment is indicated by a "#" at the start of the line.
#  (iv) This file may be deleted on uninstalling BurnInTest or installing
#       a new version of BurnInTest. It is recommended that you keep a 
#       separate copy of this file.
#__________________________________________________________
#
# PassMark BurnInTest,,, 
# Error message text and classification,,,
#
0,"No errors",NONE,
1,"Incorrect mathematical addition",SERIOUS,
2,"Incorrect mathematical subtraction",SERIOUS,
3,"Incorrect mathematical division",SERIOUS,
4,"Incorrect mathematical multiply",SERIOUS,
5,"Incorrect MMX addition",SERIOUS,
6,"Incorrect MMX subtraction",SERIOUS,
7,"Incorrect MMX multiplication",SERIOUS,
8,"Failed Windows call - Line Drawing",SERIOUS,
9,"Failed Windows call - Bitmaps",SERIOUS,
10,"Failed Windows call - Shapes",SERIOUS,
11,"No free memory for buffer",WARNING,Disk tests
12,"Not enough free disk space",WARNING,
13,"Test file could not be created. Check access privileges.",WARNING,
14,"Error while writing to the disk",SERIOUS,
15,"Test file could not be re-opened",WARNING,
16,"Error while reading from the disk",SERIOUS,
17,"Data Verify failure",SERIOUS,
18,"CD Media is not ready to be played",WARNING,OLD
19,"Could not find CD in Drive",WARNING,OLD
20,"",NONE,Floppy disk OLD
21,"Error initializing DirectX",WARNING,3D
22,"Unknown DirectX error",SERIOUS,
23,"Warning: Switching to reference rasteriser",WARNING,
24,"Error loading DirectX .dll",WARNING,
25,"Error creating DirectX textures",WARNING,
26,"Error initializing DirectX device",WARNING,
27,"Could not find the default printer",WARNING,Printer
28,"Could not open the default printer",SERIOUS,
29,"Could not send page to printer",SERIOUS,
30,"Error verifying data in RAM",SERIOUS,
31,"Error connecting to network",WARNING,Network
32,"Could not create a network socket",SERIOUS,
33,"Could not set socket timeouts",SERIOUS,
34,"Could not resolve host name, check settings",SERIOUS,
35,"Could not allocate memory for packets",SERIOUS,
36,"Timeout sending packet",SERIOUS,
37,"Timeout waiting for packet",SERIOUS,
38,"Error sending packet. Check destination address.",SERIOUS,
39,"Error receiving packet",SERIOUS,
40,"Got someone else's packet",WARNING,
41,"Bad packet. Length incorrect",SERIOUS,
42,"Could not set CD Time format",WARNING,Additional CD ROM Errors
43,"Could not get number of audio tracks",WARNING,
44,"Could not play the audio track",WARNING,
45,"CD-ROM failed to return status WARNING",SERIOUS,
46,"Can not detect audio information on CD",WARNING,
47,"No audio media in CD-ROM",WARNING,
48,"No permission to open RAW network socket",WARNING,More Network
49,"Networking functions aren't available (ws2_32.dll)",WARNING,
50,"COM port is already in use by another program",SERIOUS,Serial port
51,"The requested COM port could not be found",SERIOUS,
52,"Error while opening COM port",SERIOUS,
53,"Error getting current COM port configuration",SERIOUS,
54,"Error while setting new COM port configuration",SERIOUS,
55,"Corruption. Data received didn't match data sent",CRITICAL,
56,"Error while setting current COM port timeouts",SERIOUS,
57,"Error while sending data to the COM port",CRITICAL,
58,"Error while receiving from the COM port. Check plug is connected.",CRITICAL,
59,"",NONE,Spare
60,"Error loading Parallel port device driver. Check administrator privileges.",WARNING,Parallel port
61,"Corruption. Data received didn't match data sent. Check plug is connected.",SERIOUS,
62,"Error while sending data to the parallel port",SERIOUS,
63,"Error while receiving data from the parallel port",SERIOUS,
64,"Could not detect the parallel port selected",WARNING,
65,"Could not access the tape drive selected",SERIOUS,Tape drive
66,"Error while formatting tape partition",SERIOUS,
67,"Error while loading (rewinding) tape",SERIOUS,
68,"Error while locking tape in drive",SERIOUS,
69,"Tape device is not ready to start test",SERIOUS,
70,"No media in tape drive",WARNING,
71,"No free memory for write buffer",WARNING,
72,"Error while seeking to new position on tape",SERIOUS,
73,"Future expansion",NONE,
74,"Error while writing to tape",SERIOUS,
75,"Error while writing file marker between files",SERIOUS,
76,"Error while reading data block from tape",SERIOUS,
77,"Corruption. Data read didn't match data written",SERIOUS,
78,"Unable to get tape drive parameters",SERIOUS,
79,"Unable to get tape media parameters",WARNING,
80,"Tape is write protected",WARNING,
81,"Tape partition is too small for test files",WARNING,
82,"Checksum failure for optical disk file",SERIOUS,CD Drive data test mode
83,"Could not open file on optical disk for reading",SERIOUS,
84,"Error while reading file from optical disk",SERIOUS,
85,"Error while searching for files on optical data disk",SERIOUS,
86,"Incorrect 128bit (SIMD-SSE) floating point addition",SERIOUS,SIMD errors
87,"Incorrect 128bit (SIMD-SSE) floating point multiply",SERIOUS,
88,"Incorrect 64bit 3DNow! floating point result",SERIOUS,3DNow!
89,"",NONE,Not used as yet
90,"Info",WARNING,*** SPECIAL NULL MESSAGES ** used for info messages in error log
91,"Could not set tape drive parameters",SERIOUS,More Tape drive
92,"Could not set tape media parameters",SERIOUS,
93,"Tape drive has reported that it requires cleaning",WARNING,
94,"Tape drive does not support partition formatting",SERIOUS,
95,"No optical drive letter specified",WARNING,More CD
96,"Error allocating RAM",SERIOUS,More RAM test
97,"Bad packet. Checksum incorrect",SERIOUS,More Network test
98,"Bad packet. Corrupt data",SERIOUS,
99,"Data read from optical disk was incorrect",SERIOUS,PassMark Test CD / DVD
100,"Could not determine type of Passmark test CD/DVD",WARNING,
101,"Disk is full or FAT root file system limit reached",WARNING,Disk test 
102,"Could not open MIDI Sequencer or MIDI file",SERIOUS,Sound / Midi test
103,"Failed to play back MIDI via sequencer",SERIOUS,
104,"Could not play back wave file",SERIOUS,
105,"Could not detect USB loopback plug",CRITICAL,USB testing
106,"USB loopback plug identified itself incorrectly",SERIOUS,
107,"Could not allocate RAM for USB I/O buffers",WARNING,
108,"USB device open failed",SERIOUS,
109,"USB device reset failed",SERIOUS,
110,"Setting USB data rate failed",SERIOUS,
111,"Setting USB data characteristics failed",SERIOUS,
112,"Setting USB flow control failed",SERIOUS,
113,"Setting USB I/O timeouts failed",SERIOUS,
114,"Purging of USB I/O data buffers failed",SERIOUS,
115,"Set USB loopback DTR failed",SERIOUS,
116,"Set USB loopback RTS failed",SERIOUS,
117,"Data packet transmission failed",SERIOUS,
118,"USB driver reported send error",SERIOUS,
119,"Data packet reception failed",SERIOUS,
120,"USB driver reported receive error",SERIOUS,
121,"USB data packet verify failed",SERIOUS,
122,"Warning: Too many USB errors, attempted reset",WARNING,
123,"Error writing to disk - Disk is full",SERIOUS,Disk
124,"Network test alarm. Error ratio exceeded",SERIOUS,Network
125,"Insufficient rights to lock pages. See help",WARNING,RAM Advanced
126,"Could not open printer command file",SERIOUS,Printer
127,"Could not open printer spooler",SERIOUS,
128,"Error writing data to spooler",SERIOUS,
129,"Could not get extended RAM info. W2000 or XP Req.",WARNING,RAM Advanced
130,"COM port Clear To Send (CTS) line stuck high",SERIOUS,Serial
131,"COM port Clear To Send (CTS) line stuck low",SERIOUS,
132,"COM port Data Set Ready (DSR) line stuck high",SERIOUS,
133,"COM port Data Set Ready (DSR) line stuck low",SERIOUS,
134,"Warning - Disk low speed threshold crossed",WARNING,Disk test
135,"Out of video memory",WARNING,D3D8 test
136,"Audio Input doesn't match Audio Output",WARNING,Audio loopback test
137,"Corrupt Audio input",SERIOUS,
138,"Warning: Could not lock parallel port",WARNING,PP
139,"Could not detect specified optical drive",WARNING,CD test with NO CD option
140,"The drive detected was not an optical drive",WARNING,
141,"Parallel device driver not initialized",SERIOUS,PP
142,"Could not open parallel device driver",SERIOUS,PP
143,"Parallel device driver could not detect port",SERIOUS,"PP, could be invalid or corrupt LPT selection e.g. LPT4 or LPT0"
144,"Video memory corruption",SERIOUS,2D DirectDraw test
145,"Error initializing DirectDraw",SERIOUS,
146,"Frame could not be displayed and was skipped",WARNING,
147,"Not enough video memory available for test",WARNING,
148,"Minimum colour depth of 16 bits required.",WARNING,
149,"SMART Threshold exceeding condition detected.",SERIOUS,
150,"Recoverable Video playback error.",SERIOUS,
151,"Unrecoverable video playback error.",CRITICAL,
152,"Video format not supported or invalid.",SERIOUS,
153,"Unable to obtain video control interface.",SERIOUS,
154,"Video window management problem.",SERIOUS,
155,"Unable to play the video file.",CRITICAL,
156,"Video Codec not supported or audio only.",CRITICAL,
157,"Configured Parallel port does not exist",WARNING,
158,"Could not set USB2Test mode",SERIOUS,
159,"Unable to get disk Volume extent information",SERIOUS,
160,"Butterfly seeking test not supported for this disk",WARNING,
161,"Unable to open Physical disk drive for seeking",SERIOUS,
162,"Seek size requested not equal to actual",SERIOUS,
163,"Not enough memory for the test",SERIOUS,
164,"Unable to load DirectDraw functions",SERIOUS,
165,"Software emulation is not available",SERIOUS,
166,"No hardware support for operation",SERIOUS,
167,"Hardware-only DirectDraw object creation not possible",SERIOUS,
168,"Invalid video file specified",SERIOUS,
169,"Could not initialize Video interfaces",SERIOUS,
170,"Unsupported waveform audio format for output device",SERIOUS,
171,"Sound output device unable to be opened",SERIOUS,
172,"Could not create the sound output object",SERIOUS,
173,"Unsupported waveform audio format for input device",SERIOUS,
174,"Sound input device unable to be opened",SERIOUS,
175,"Unable to allocate memory for audio clip buffer",SERIOUS,
176,"Insufficient system resources to complete test",SERIOUS,
177,"Unable to create CD test data",SERIOUS,
178,"Unable to initialize for CD burning",SERIOUS,
179,"Unable to open CD test data",SERIOUS,
180,"Unable to select CD recorder for test CD drive",SERIOUS,
181,"Unable to Burn CD",SERIOUS,
182,"Video Playback is dropping samples",WARNING,
183,"Watchdog timeout on USB2 device",WARNING,
184,"External Plug-in reported error",WARNING,
185,"",CRITICAL,*** RESERVED FOR BURNINTEST USE ** Do not change this error definition
186,"External Plug-in file does not exist",SERIOUS,
187,"Unable to communicate with the External Plug-in",WARNING,
188,"UDP packet loss has risen above set threshold",WARNING,
189,"Data failed to validate, checksum error",SERIOUS,
190,"Unable to initialize advanced network test",SERIOUS,
191,"Corrupt header data",SERIOUS,
192,"Unable to start winsock, advanced network test can not continue",SERIOUS,
193,"COM port detected a Receive Queue overflow",CRITICAL,
194,"COM port detected a Receive Overrun Error",CRITICAL,
195,"COM port detected a Receive Parity Error",CRITICAL,
196,"COM port detected a Receive Framing error",CRITICAL,
197,"COM port detected a Transmit Queue is full",CRITICAL,
198,"Automatic data transmission recovery attempted",WARNING,
199,"Automatic data reception recovery attempted",WARNING,
200,"File system not mounted",SERIOUS,Disk tests
201,"OpenGL version outdated, needs to be v1.2 and above",SERIOUS,3D Graphics outdated OpenGL version
202,"Error querying device",SERIOUS,Serial port RTS/DTR
203,"root(admin) access needed to run this test",SERIOUS,
204,"System unable to allocate memory resource",SERIOUS,malloc returns NULL
205,"System unable to allocate memory resource for generating random points",SERIOUS,2D graphics
206,"OpenGL is not installed or is not installed correctly",SERIOUS,3D Graphics
207,"Permission error writing to disk",SERIOUS,
208,"Could not play back MP3 file",SERIOUS,
209,"Unknown Plugin error",CRITICAL,*** RESERVED FOR BURNINTEST USE ** Do not change this error definition - PLUGIN1 default
210,"Unknown Plugin error",CRITICAL,*** RESERVED FOR BURNINTEST USE ** Do not change this error definition - PLUGIN2 default
211,"Unknown Plugin error",CRITICAL,*** RESERVED FOR BURNINTEST USE ** Do not change this error definition - PLUGIN3 default
212,"Unknown Plugin error",CRITICAL,*** RESERVED FOR BURNINTEST USE ** Do not change this error definition - PLUGIN4 default
213,"Unknown Plugin error",CRITICAL,*** RESERVED FOR BURNINTEST USE ** Do not change this error definition - PLUGIN5 default
214,"Advanced Network test timed out",SERIOUS,
215,"Advanced Network test error",SERIOUS,
216,"No media detected in drive",WARNING,
217,"No operations reported in timeout period",WARNING,
218,"Advanced Network Socket error",SERIOUS,
219,"Advanced Network Send error",SERIOUS,
220,"Advanced Network Send error - no data sent",SERIOUS,
221,"Advanced Network Receive error",SERIOUS,
222,"Advanced Network Receive error - no data received",SERIOUS,
223,"Unable to open test window",SERIOUS,
224,"Failed to create texture for 3D test",SERIOUS,
225,"DirectX Direct3D version required is unavailable",SERIOUS,
226,"Direct3D hardware accelerator function unavailable",SERIOUS,
227,"Unable to create dialog for GUI test",SERIOUS,
228,"Unable to create image list for GUI test",SERIOUS,
229,"Failed Windows call - GUI treeview",SERIOUS,
230,"Failed Windows call - GUI listbox",SERIOUS,
231,"Failed Windows call - GUI listview",SERIOUS,
232,"Failed Windows call - GUI progress bar",SERIOUS,
233,"Failed Windows call - GUI sliders",SERIOUS,
234,"Failed Windows call - GUI checkboxes",SERIOUS,
235,"Failed Windows call - GUI shake test",SERIOUS,
236,"Not enough packets sent to verify error ratio",WARNING,Network
237,"Your system has suffered an internal error",CRITICAL,
238,"Hardware failure detected",CRITICAL,
239,"Access Violation",CRITICAL,
240,"Test control message error",CRITICAL,
241,"No Endpoints. Check endpoint.exe & firewalls.",CRITICAL,
242,"Unable to connect to Endpoint. Check endpoint.exe.",CRITICAL,
243,"Unable to load performance counters",SERIOUS,
244,"Connection error",SERIOUS,
245,"Media disconnected",SERIOUS,
246,"Unable to bind to local NIC",CRITICAL,
247,"Not ready to send data (timeout)",WARNING,
248,"Not ready to receive data(timeout)",WARNING,
249,"The 3D test was interrupted",WARNING,
250,"No operations in a memory test process",WARNING,
251,"Memory test failure.",SERIOUS,
252,"Standard memory test failure.",SERIOUS,
253,"Failed to start a memory test process.",WARNING,
254,"A test process failed to allocate memory",WARNING,
255,"No NIC detected. Check test type.",SERIOUS,
256,"Unable to create CD/DVD test data",SERIOUS,
257,"Unable to initialize for CD/DVD burning",SERIOUS,
258,"Unable to Burn CD/DVD",SERIOUS,
259,"Unable to Erase CD/DVD",SERIOUS,
260,"IMAPI v2 not available",SERIOUS,
261,"No media in drive",WARNING,
262,"Incorrect media in drive for test",WARNING,
263,"General instruction operation verification failed",SERIOUS,
264,"FPU operation verification failed",SERIOUS,
265,"MMX operation verification failed",SERIOUS,
266,"SSE operation verification failed",SERIOUS,
267,"SSE2 operation verification failed",SERIOUS,
268,"SSE3 operation verification failed",SERIOUS,
269,"SSE4.1 operation verification failed",SERIOUS,
270,"SSE4.2 operation verification failed",SERIOUS,
271,"SSE4a operation verification failed",SERIOUS,
272,"Prime number operation verification failed",SERIOUS,
273,"No operations during test period",SERIOUS,
274,"Parallel port test requires 64-bit version of BurnInTest",WARNING,Parallel port
275,"The 2D memory test is incompatible with the 3D Full screen test",WARNING,
276,"The physical drive is fixed, contains partitions or Windows files.",WARNING,
277,"The physical drive does not exist on this system. Check settings.",WARNING,
278,"Bluetooth not supported. Check your Bluetooth adapter.",SERIOUS,
279,"Failed to connect to the Bluetooth device.",SERIOUS,
280,"Unable to start Windows sockets. Bluetooth test can not continue",SERIOUS,
281,"Error searching for Bluetooth device.",SERIOUS,
282,"Unable to determine service profiles for Bluetooth device.",SERIOUS,
283,"Bluetooth device does not support required service profile (see help).",SERIOUS,
284,"Bluetooth test not supported on this Operating System (see help).",SERIOUS,
285,"Warning - Network low speed threshold crossed",WARNING,
286,"No IPv4 Endpoints. Check endpoint NIC and operating system.",CRITICAL,
287,"No IPv6 Endpoints. Check endpoint NIC and operating system.",CRITICAL,
288,"Unable to unmount volume. Device in use, close program using device.",CRITICAL,
289,"Error playing video's audio stream - CPU usage exceeded",SERIOUS,
290,"Error playing video's audio stream",SERIOUS,
291,"Temperature threshold exceeded",CRITICAL,
292,"The self-test routine was aborted by the host",SERIOUS,
293,"The self-test routine was interrupted by the host with a hardware or software reset",SERIOUS,
294,"The self-test routine was stopped due to a fatal or unknown error",SERIOUS,
295,"The last self-test routine completed with a failure of an unknown test element",SERIOUS,
296,"The last self-test routine completed with a failure of the electrical element",SERIOUS,
297,"The last self-test routine completed with a failure of the servo and/or seek test element",SERIOUS,
298,"The last self-test routine completed with a failure of the read element",SERIOUS,
299,"The last self-test routine completed with a failure due to handling damage",SERIOUS,
300,"Unable to execute the self test. The self test may not be supported by the drive.",INFORMATION,
301,"Unknown error.",WARNING,
302,"2D graphics test was interrupted, possible device driver fault",WARNING,
303,"Unable to read network adapter connection status.",INFORMATION,
304,"USB3.0 voltage too high",INFORMATION,
305,"Audio Input doesn't match Audio Output on left channel",WARNING,Audio loopback test
306,"Corrupt Audio input on left channel",SERIOUS,
307,"Audio Input doesn't match Audio Output on right channel",WARNING,Audio loopback test
308,"Corrupt Audio input on right channel",SERIOUS,
309,"User reported webcam visual error",SERIOUS,
310,"Webcam test setup error",SERIOUS,
311,"Battery monitoring setup error",SERIOUS,
312,"Error retrieving battery information",SERIOUS,
313,"Battery threshold exceeded error",SERIOUS,
314,"Battery over charged",WARNING,
315,"No batteries detected",SERIOUS,
316,"User reported microphone audio error",SERIOUS,
317,"Microphone test setup error",SERIOUS,
318,"No microphone detected",SERIOUS,
319,"Unknown error",SERIOUS,
320,"GPGPU integer operations verification failed",SERIOUS,
321,"GPGPU floating point operations verification failed",SERIOUS,
322,"GPGPU maths test setup error",SERIOUS,
323,"GPGPU unable to access graphics resource required for verification",SERIOUS,
324,"Windows Hardware Error Architecture",INFORMATION,
325,"Windows Hardware Error Architecture",WARNING,
326,"Windows Hardware Error Architecture",SERIOUS,
327,"Windows Hardware Error Architecture",CRITICAL,
328,"No network adapters detected that match test criteria",SERIOUS,
329,"GPGPU test not supported on this GPU",SERIOUS,
330,"PCIe card open failed",SERIOUS,
331,"Unable to configure PCIe card",SERIOUS,
332,"PCIe write error",SERIOUS,
333,"PCIe read error",SERIOUS,
334,"PCIe data packet verify failed",SERIOUS,
335,"Failed to update PCIe Voltage statistics",SERIOUS,
336,"PCIe temperature out of range",INFORMATION,
337,"PCIe voltage out of range",INFORMATION,
338,"Could not detect PCIe loopback card",CRITICAL,
339,"Could not play back 2D test sine wave tone",SERIOUS,
340,"Unable to start 2D test, selected test requires at least 2 monitors.",SERIOUS,
341,"Butterfly seeking skipped for this disk (SSD/NVMe)",INFORMATION,
342,"Failed to re-enumerate USB3.0 plug",CRITICAL,
343,"USB3.0 operation timeout",CRITICAL,
344,"USB3.0 plug is not connected at 5Gbps SuperSpeed",WARNING,
345,"Warning - USB3.0 plug low speed threshold crossed",WARNING,
346,"TPM not found",SERIOUS,
347,"An error occured while trying to access the TPM",SERIOUS,
348,"TPM self test failed",SERIOUS,
349,"Bluetooth send error",SERIOUS,
350,"Bluetooth receive error",SERIOUS,
351,"Bluetooth data verify failed",SERIOUS,
352,"Bluetooth socket error",SERIOUS,
353,"Warning - Bluetooth low speed threshold crossed",WARNING,
354,"Unable to initialize advanced Bluetooth test",SERIOUS,
355,"Bluetooth test error",SERIOUS,
356,"Unable to find starbox_1024.dds or media files required for DX12 test",SERIOUS,3D Graphics,
357,"Unable to launch D3D12Test64.exe for DX12 test",SERIOUS,3D Graphics
358,"Required TPM DLL (tbs.dll) unable to be loaded",SERIOUS,
359,"Required TPM functions not found",SERIOUS,
360,"TPM self test command blocked",SERIOUS,
361,"An error occured during the DX12 3D test",SERIOUS,
362,"The 3D DX12 test was stopped by the user before completing.",SERIOUS,
363,"Unable to start DX12 test",SERIOUS,
364,"USB3.0 Low level error detected",INFORMATION,
365,"Available RAM is very low, RAM test is restricted to testing only a small amount of RAM",INFORMATION,
# Do not edit beyond this line
0,"No errors [limited evaluation version]",NONE,